Crosley Washer Dryer Combo Brackets and Flanges

Videos!

Your Price

$7.60

Crosley Washer Dryer Combo Spring Outer Bracket

★★★★★

1 Review

PartSelect Number PS11743348

Manufacturer Part Number WP64067

Sold individually.

Installation Instructions

Edward from Easthampton, MA

unbalanced load...knocking sound.

Unbalanced load was creating a knocking sound (as if the clothes load was unbalanced). Dismantled the washer to find that one brackets had rusted out. [FYI: 3 bracket at 120 degree apart (for the 360 degree circle)]. I found that the hole (on the bracket) where the spring holds was gone. Purchased parts. Replaced them (spring, bracket, screw). Reassembled washer then ran wash for a cycle. Successful fix. Read more...

Your Price

$34.37

Crosley Washer Dryer Combo Bracket

PartSelect Number PS11756155

Manufacturer Part Number WPW10547294

Your Price

$11.13

Crosley Washer Dryer Combo Motor Retainer Clip

★★★★★

1 Review

PartSelect Number PS11748229

Manufacturer Part Number WPW10086010

This part is sold individually.

Installation Instructions

Doreen from Ashtabula, OH

washer would not spin or agitate

I first took the 2 screws out and disconnected the wires, I got my parts ordered and when they came in I put it back together then plugged th wires back in. I really could not believe that I could do something of this nature but when I started it was easy. My boyfriend wanted to take the washer to a repair shop, but I said first I will take a look and see if it will be worth saving. Otherwise I will junk it. It cost me with shipping costs 41.00 I am very proud of my self.
But I read other peoples experience on fixing the same problem that I had so I gave it a try.
I will not hesitate to do other jobs myself. Doreen Finlaw Read more...

Your Price

$21.67

Crosley Washer Dryer Combo BRACKET

PartSelect Number PS1990865

Manufacturer Part Number 134897001

Your Price

$13.70

Crosley Washer Dryer Combo BRACKET

PartSelect Number PS340956

Manufacturer Part Number 3349673

Installation Instructions

ITS from Carlstadt, NJ

Water can't go to upper rack.

first I removed the Bracket screw underneath of the upper rack , after that I removed the Bracket with my hand by bushing it downward (it removed complete assembly "Bracket & Spray Arm kit") the I removed the other screw to remove the Bracket completely, then I installed the new part's by reversing all above steps, finally I installed the Two screws back again.
It is so easy!!!!!!!!!!!!!!!!!!!!! Read more...