Black and Decker Trimmer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Black and Decker Trimmer Parts
Your Price
$6.19
In Stock
Black and Decker Trimmer Cover
PartSelect Number PS12443187
Manufacturer Part Number 385022-03N
This cover is designed for use with trimmers and edgers and is a genuine OEM part. Made of plastic, this cover is used to hold and secure the spool or line within the trimmer cutter head assembly. If the cover for your trimmer is broken or damaged and cannot contain the spool or line, the cover needs to be replaced immediately. To replace the cover, push in the upper slots on the cover, which will disconnect and release it from the rest of the assembly.
Your Price
$5.95
In Stock
Your Price
$20.09
In Stock
Black and Decker Trimmer Gear & Spindle
Opened motor head. Remove 7 torx screws
Opened split housing using a small straight slot screw driver.
Removed gear from housing and pulled it out the bearing housing.
Opened split housing on trigger end. 8 torn screws.
Opened split case with flat screw driver.
Removed motor connections in trigger end for motor.
Pulled motor cable and motor from extention tube.
Please note tube orientation for easy reassemble.
Install new cable/motor on trigger end. Reinstall housing on trigger end.
Install new motor and gear head into new housing. Be sure to install old electrical brace stop to protect new cable.
Roll gear head to verify easy non-binding rotation.
Install top of split case for motor/head end.
Reinstall line guard and line guide.
Test with battery to proof the assembly Read more...
PartSelect Number PS12530718
Manufacturer Part Number N498091
Fixes these symptoms
- Cutting line does not come out
- Engine revs but trimmer head will not turn
- See more...
Installation Instructions
Mark from CATOOSA, OK
Bearings on motor armature were shot ... driver gear not turning driven gear.
Took off line guard and guide. Remove 1 Phillips screw.Opened motor head. Remove 7 torx screws
Opened split housing using a small straight slot screw driver.
Removed gear from housing and pulled it out the bearing housing.
Opened split housing on trigger end. 8 torn screws.
Opened split case with flat screw driver.
Removed motor connections in trigger end for motor.
Pulled motor cable and motor from extention tube.
Please note tube orientation for easy reassemble.
Install new cable/motor on trigger end. Reinstall housing on trigger end.
Install new motor and gear head into new housing. Be sure to install old electrical brace stop to protect new cable.
Roll gear head to verify easy non-binding rotation.
Install top of split case for motor/head end.
Reinstall line guard and line guide.
Test with battery to proof the assembly Read more...
Your Price
$49.51
In Stock
Black and Decker Trimmer Motor & Mount
Opened motor head. Remove 7 torx screws
Opened split housing using a small straight slot screw driver.
Removed gear from housing and pulled it out the bearing housing.
Opened split housing on trigger end. 8 torn screws.
Opened split case with flat screw driver.
Removed motor connections in trigger end for motor.
Pulled motor cable and motor from extention tube.
Please note tube orientation for easy reassemble.
Install new cable/motor on trigger end. Reinstall housing on trigger end.
Install new motor and gear head into new housing. Be sure to install old electrical brace stop to protect new cable.
Roll gear head to verify easy non-binding rotation.
Install top of split case for motor/head end.
Reinstall line guard and line guide.
Test with battery to proof the assembly Read more...
PartSelect Number PS12526009
Manufacturer Part Number N498090
Installation Instructions
Mark from CATOOSA, OK
Bearings on motor armature were shot ... driver gear not turning driven gear.
Took off line guard and guide. Remove 1 Phillips screw.Opened motor head. Remove 7 torx screws
Opened split housing using a small straight slot screw driver.
Removed gear from housing and pulled it out the bearing housing.
Opened split housing on trigger end. 8 torn screws.
Opened split case with flat screw driver.
Removed motor connections in trigger end for motor.
Pulled motor cable and motor from extention tube.
Please note tube orientation for easy reassemble.
Install new cable/motor on trigger end. Reinstall housing on trigger end.
Install new motor and gear head into new housing. Be sure to install old electrical brace stop to protect new cable.
Roll gear head to verify easy non-binding rotation.
Install top of split case for motor/head end.
Reinstall line guard and line guide.
Test with battery to proof the assembly Read more...
Your Price
$5.19
In Stock
Black and Decker Trimmer Lever Assembly
PartSelect Number PS12004487
Manufacturer Part Number 90567077
Fixes these symptoms
- Cutting line does not come out
- See more...
Your Price
$5.95
In Stock
Black and Decker Trimmer Lever Assembly
PartSelect Number PS12514433
Manufacturer Part Number 90626568
Your Price
$5.15
In Stock
Your Price
$5.95
In Stock
Black and Decker Trimmer Blade
PartSelect Number PS10254147
Manufacturer Part Number 90559116
This OEM-verified metal trimmer blade attaches to the guard assembly of your string trimmer. Its purpose is to cut off excess or protruding string during operation, keeping the string at an optimal length within the guard. Over time, the blade can become dull or worn out, showing signs of deformation, bends, or cracks. A damaged blade will affect the machine performance, resulting in untidy or poorly trimmed areas as excessive string is released outside the guard. To replace the blade, use a screwdriver to unthread the screw securing it. The blade is sold individually, while the hardware is sold separately.
Your Price
$12.83
In Stock
Black and Decker Trimmer Motor Housing
Opened motor head. Remove 7 torx screws
Opened split housing using a small straight slot screw driver.
Removed gear from housing and pulled it out the bearing housing.
Opened split housing on trigger end. 8 torn screws.
Opened split case with flat screw driver.
Removed motor connections in trigger end for motor.
Pulled motor cable and motor from extention tube.
Please note tube orientation for easy reassemble.
Install new cable/motor on trigger end. Reinstall housing on trigger end.
Install new motor and gear head into new housing. Be sure to install old electrical brace stop to protect new cable.
Roll gear head to verify easy non-binding rotation.
Install top of split case for motor/head end.
Reinstall line guard and line guide.
Test with battery to proof the assembly Read more...
PartSelect Number PS12510041
Manufacturer Part Number 90636582
Installation Instructions
Mark from CATOOSA, OK
Bearings on motor armature were shot ... driver gear not turning driven gear.
Took off line guard and guide. Remove 1 Phillips screw.Opened motor head. Remove 7 torx screws
Opened split housing using a small straight slot screw driver.
Removed gear from housing and pulled it out the bearing housing.
Opened split housing on trigger end. 8 torn screws.
Opened split case with flat screw driver.
Removed motor connections in trigger end for motor.
Pulled motor cable and motor from extention tube.
Please note tube orientation for easy reassemble.
Install new cable/motor on trigger end. Reinstall housing on trigger end.
Install new motor and gear head into new housing. Be sure to install old electrical brace stop to protect new cable.
Roll gear head to verify easy non-binding rotation.
Install top of split case for motor/head end.
Reinstall line guard and line guide.
Test with battery to proof the assembly Read more...
Your Price
$7.55
In Stock
Black and Decker Trimmer Cap Assembly
PartSelect Number PS12094047
Manufacturer Part Number 90583594N
Black and Decker Trimmer Appliance Types
Related Black and Decker Trimmer Parts
- Black and Decker Trimmer Bearings
- Black and Decker Trimmer Belts
- Black and Decker Trimmer Blades
- Black and Decker Trimmer Brushes
- Black and Decker Trimmer Caps and Lids
- Black and Decker Trimmer Fans and Blowers
- Black and Decker Trimmer Gears
- Black and Decker Trimmer Knobs
- Black and Decker Trimmer Power Cords
- Black and Decker Trimmer Springs and Shock Absorbers
- Black and Decker Trimmer Switches
- Black and Decker Trimmer Wire Plugs and Connectors
Popular Black and Decker Trimmer Models
Below are the most popular Black and Decker Trimmer models we have. Enter your model number in the search box to find your model.
- LST140C 40v Lith String Trim
- LST136 36V String Trimmer
- LST136 Cordless String Trimmer
- LST136 Cordless String Trimmer
- ST4500 12V String Trimmer
- ST4500 12V String Trimmer
- ST4500 12" Trimmer /Edger
- ST4500 12 String Trimmer
- ST4500 Trimmer Edger
- ST4500 12V String Trimmer
- LST560C 60v Easyfeed Trimm
- GH1000 14" String Trimmer
- GH1000 14" Grass Hog XP Trimmer/Edger
- GH1000 14" Grass Hog XP Trimmer/Edger
- GH900 6.5 Amp String Trimmer Power Tool
- GH900 6.5 Amp String Trimmer
- LSTE525 20v Pc Easy Feed Tri
- 8220 Lawn Trimmer
- 8220 Lawn Trimmer
- 8220 Lawn Trimmer