Airstream Parts

Airstream Edger Air Cleaner Element For P-wle-0799-f2n

★★★★★

★★★★★

1 Review

This foam air cleaner element helps to keep dirt and debris out of the engine in your lawn equipment. It is sometimes called an air filter element, cartridge, or insert. You can find it near the engine in a housing that lets air into the combustion chamber, where it gets mixed with fuel. This fuel-air mixture produces energy that powers the engine when it is ignited by the spark plug. If the element gets dirty or clogged, you will need to replace it. If you do not replace it, you may notice black smoke coming out of your machine. Your engine will work poorly and might use more gas than it should. To remove your element, refer to your user manual for instructions, as the steps may vary from one model to another. Generally, you need to locate the element housing and remove the screws or clips that hold its cover in place. You can then carefully remove the element from inside. This genuine OEM replacement part is sold individually.

Airstream Edger Bolt

Airstream Edger Air Cleaner Housing This housing is what directly connects the rest of the air filter housing to the equipment. This genuine OEM part is made of high-quality plastic and is compatible with several different models of edgers, but the hardware to fasten this housing to your equipment is sold separately. If there are any cracks or the fit and seal for the air filter housing is not tight enough, the housing will need to be replaced because it seals dust, dirt, and debris from entering your equipment, ensuring better health and performance. The cleaner your air filter, the better and longer your equipment will run and stay running, without need for costlier repairs. This housing is typically fastened to the side of the engine but consult with the user manual for your model for the appropriate installation location.

Airstream Edger Air Cleaner Cover Assembly

Airstream Edger Drive Shaft Assembly

Airstream Edger Air Cleaner Gasket This OEM-approved air cleaner gasket creates a seal between the air cleaner housing and the carburetor in your lawn and garden equipment. It makes sure that only clean air enters the engine for combustion. Over time, the gasket wears out. It may appear cracked, flattened, or distorted. You need to replace a damaged gasket. Otherwise, air leaks can happen, and debris and contaminants can enter the engine. This leads to reduced engine efficiency, rough running, and even engine stalling. If you are replacing your gasket, remove the spark plug first. You then need to access the air cleaner housing by removing its cover with a screwdriver. You can then peel off the gasket from the housing. This replacement part is sold individually.

Airstream Edger Sustain Board This sustain board is used to keep the filter in the correct position within the air filter housing for a variety of different edgers. Made of plastic and sold as an individual part, this sustain board also serves the purpose of creating a better seal within the housing. Before replacing this sustain board, check to ensure the filter is clean and not clogged, and that the rest of the housing is intact. To replace the sustain board, simply unscrew, disconnect and remove the cover for the housing, the air filter, and the old sustain board, before installing the new board, the filter, and the cover.

Airstream Edger Belt

★★★★★

★★★★★

1 Review

This is a genuine OEM replacement part specifically designed for lawn edgers. The belt, made of rubber, has a length of 56 inches and a width of 1/2 inch. Note that your previous belt may appear longer than this due to stretching and wear over time. Its primary function is to connect the motor to the blade, enabling the blade to spin and efficiently cut grass. If you notice signs of fraying, tearing, or hear squeaking and grinding noises while operating the edger, it indicates that the belt is no longer functioning as it should and should be replaced. When removing the damaged belt, take note of how it is threaded around the pulleys to ensure that you install it the correct way. The belt is crucial to the performance of the edger; therefore, it is important to regularly inspect the belt and replace it when necessary.

Airstream Edger Fuel Hose

Airstream Edger Starter Assembly For P-wle-0799-f2n This starter assembly is a recoil mechanism with a pulley, starter rope, handle, guide pan and springs; everything you need to efficiently start your equipment. This starter assembly is designed for and compatible with various models of edgers and is sold as an individual OEM assembly, without any securing hardware like screws. Starter assemblies can break, wear out, and eventually need replacing because they are a high-use part, and this can show in areas such as starter ropes breaking or fraying, recoil springs not holding the same level of tension, or if a smaller, more complex component within the assembly is not working properly anymore. If you notice that your edger is not starting easily, has starting issues, or the engine simply no longer cranks ? those are signs that the starter assembly needs replacing. This replacement process is as simple as unscrewing the securing screws from the old starter assembly from the cylinder head part of your edger and securing the new starter assembly in its place.