Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 4 at 11:59pm EST.
Murray Lawn Mower Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Murray Lawn Mower Parts
HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
- Mower blade does not cut
- See more...
Make Bend adjustments for the Handle to fit. Read more...
- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest. Read more...
Murray Lawn Mower Appliance Types
Related Murray Lawn Mower Parts
- Murray Lawn Mower Bags
- Murray Lawn Mower Bearings
- Murray Lawn Mower Belts
- Murray Lawn Mower Blades
- Murray Lawn Mower Brackets and Flanges
- Murray Lawn Mower Brushes
- Murray Lawn Mower Caps and Lids
- Murray Lawn Mower Carburetors
- Murray Lawn Mower Control Cables
- Murray Lawn Mower Deflectors and Chutes
- Murray Lawn Mower Engines
- Murray Lawn Mower Exhausts
- Murray Lawn Mower Fans and Blowers
- Murray Lawn Mower Filters
- Murray Lawn Mower Fuses
- Murray Lawn Mower Gears
- Murray Lawn Mower Grilles and Kickplates
- Murray Lawn Mower Handles
- Murray Lawn Mower Hardware
- Murray Lawn Mower Hoses and Tubes
- Murray Lawn Mower Ignitions
- Murray Lawn Mower Knobs
- Murray Lawn Mower Latches
- Murray Lawn Mower Lights and Bulbs
- Murray Lawn Mower Pulleys
- Murray Lawn Mower Seals and Gaskets
- Murray Lawn Mower Shear Pins
- Murray Lawn Mower Spark Plugs
- Murray Lawn Mower Springs and Shock Absorbers
- Murray Lawn Mower Starters
- Murray Lawn Mower Switches
- Murray Lawn Mower Thermostats
- Murray Lawn Mower Transmissions and Clutches
- Murray Lawn Mower Wheels and Rollers
- Murray Lawn Mower Wire Plugs and Connectors
Popular Murray Lawn Mower Models
Below are the most popular Murray Lawn Mower models we have. Enter your model number in the search box to find your model.
- 7800583 7800583 - Walk Behind Mowers
- ZTS7500 20hp Koh W/44" Mower Deck
- ZTS7500 19hp Bands W/42" Mower Deck
- ZTS7500 Zts 7500, 26hp Kohler W/50-Inchmower Deck
- ZTS7500 20hp Koh W/44" Mower Deck
- ZTS7500 Zts 7500, 21hp Bands W/42-Inchmower Deck
- ZTS7500 22hp Bands W/50" Mower Deck
- ZTS7500 Zts 7500, 26hp Bands W/50-Inchmower Deck
- ZTS7500 22hp Bands W/50" Mower Deck
- ZTS7500 19hp Bands W/42" Mower Deck
- 21595X8A 21595x8a - Walk Behind Mowers
- 21595x8A 21" Walk-Behind Mower
- 229630x8A 22" Lawn Mower
- 7800885 7800885 - Walk Behind Mowers
- 7800885 22-In. 6.75GT Brute Steel Deck Self-Propelled Walk Behind Mower 2012
- 7800267 Lawn Mower
- 7800267 7800267 - Walk Behind Mowers
- 22965X8A 22965x8a - Walk Behind Mowers
- 22965x8A 22" Lawn Mower
- 22815X8A 22815x8a - Walk Behind Mowers