Microwave Oven Combo Brackets and Flanges

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Shop By Brand

Popular Microwave Oven Combo Brackets and Flanges

Videos!
Your Price
$16.66
  In Stock
Microwave Oven Combo Single Heating Element Support Clip
★★★★★
★★★★★
7 Reviews
PartSelect Number PS243701
Manufacturer Part Number WB2X9719
The metallic clip, or also known as a broil element support, is for a oven element on a range. This part holds the broil element in place on top of the oven. If your support clip is broken then this replacement should be the solution. The tools needed for this project are slip joint pliers. For safety precautions, make sure to unplug your range from the power source, or shut off the house circuit breaker before starting this project. Refer to the installation instructions for best results and accuracy.
Fixes these symptoms
Installation Instructions
Paul from Canton, NY
broiling element had burned through, req. its replacement
First I removed the two screws that hold the element in place. I also removed a screw that held one end of a support bracket. I then pulled the element out about 3 inches and disconnected the two wires. Reversing these steps, I finished the element's replacement.

I had noticed that the former element was sagging at the front end. I installed the additional clips (not original) on each forward end of the element for additional support. Read more...
Your Price
$15.85
  In Stock
Microwave Oven Combo Mounting Plate
★★★★★
★★★★★
2 Reviews
PartSelect Number PS7784808
Manufacturer Part Number 3300W0A045A
This mounting plate is a manufacturer-approved replacement part for your microwave. The mounting plate, or bracket, secures your above-range microwave in place against the wall. To conduct this repair, make sure to first disconnect the power source, and wear protective gloves.
Installation Instructions
Jeffrey from San Antonio, TX
Metric
Owners manual list 1/4 which was sent for the mounting bolts. They don't fit. This unit required metric. Don't try to force the bolts, just match to closest metric. Read more...
Your Price
$11.24
  Special Order
Microwave Oven Combo TOOL
PartSelect Number PS978753
Manufacturer Part Number 318246702
Your Price
$8.12
  In Stock
Microwave Oven Combo Anchor
PartSelect Number PS11740693
Manufacturer Part Number WP308125
Your Price
$44.52
  In Stock
Microwave Oven Combo Plate,Mount
★★★★★
★★★★★
1 Review
PartSelect Number PS3518617
Manufacturer Part Number 3300W0A030A
Your Price
$28.66
  In Stock
Microwave Oven Combo Broil Element Support
PartSelect Number PS241927
Manufacturer Part Number WB2X1452
This part supports the broil element in the oven.
Installation Instructions
Donna from Sinking Spring, PA
Still need an other nut to keep broiler support inplcae. Support bar did not come with new screws so I must locate one new one.
I took out the old broiler support bar, but it was being held by one screw. I did install the new bar with one screw, but I need to obtain a second screw. I still have not located a second screw, but it is inplace. Read more...
Your Price
$113.13
  In Stock
Microwave Oven Combo Mounting Bracket
PartSelect Number PS956611
Manufacturer Part Number WB56X10446
The mounting hardware is not included. This is the mounting plate only.
Your Price
$14.24
  In Stock
Microwave Oven Combo Holder,Cook Auxiliary
★★★★★
★★★★★
2 Reviews
PartSelect Number PS3524335
Manufacturer Part Number 4930W1A069A
Your Price
$11.85
  Special Order
Microwave Oven Combo Vent Grille Mounting Clip - Right Side - Black
PartSelect Number PS11726216
Manufacturer Part Number W10830163
  No Longer Available
Microwave Oven Combo Element Support and Clip
PartSelect Number PS11766760
Manufacturer Part Number W10909479
NOTE: The manufacturer has modified the original design of this part to increase durability. As a result this part may take additional effort to install. The design includes a metal clip, which helps hold the top of the ceramic bracket in place. To install this part you will need to remove the microwave from the unit. Then open the cabinet to access the area above the supports location to insert the clip.

Microwave Oven Combo Bracket or Flange Brands

Back to Top