Kawasaki Hedge Trimmer Parts

Popular Kawasaki Hedge Trimmer Parts

Your Price
$7.95
   In Stock
Kawasaki Hedge Trimmer Cap-Assembly-Tank
★★★★★
★★★★★
2 Reviews
PartSelect Number PS8998548
Manufacturer Part Number 51048-2078
The Fuel Cap Assembly, is a black, plastic cap that keeps fuel inside the tank, and debris out. If broken, fuel will begin leaking out and it must be replaced. Installation is rated as "Easy", the part simply attaches on top of the fuel tank. Refer to your make, model, and diagram to ensure this is the correct part.
Your Price
$5.13
   In Stock
Kawasaki Hedge Trimmer Grommet,Fuel Tank
★★★★★
★★★★★
2 Reviews
PartSelect Number PS9156129
Manufacturer Part Number 92071-2142
The Fuel Tank Grommet is a 1-inch, black, rubber part. It attaches to the fuel tank so you can run your fuel lines through it, and is rated as "Easy" to install by most of our customers. If worn or damaged, it will begin to leak fuel, and must be replaced. Refer to your make, model and diagrams to ensure you're choosing the right part.
Your Price
$15.11
   In Stock
Kawasaki Hedge Trimmer Breather
★★★★★
★★★★★
1 Review
PartSelect Number PS9891389
Manufacturer Part Number 14069-0013
The Breather allows air to enter the tank, so no vacuum is created as the fuel level drops, which would prevent the flow of fuel to the carburetor.It seals in the gas emissions and fuel at the same time. It is a metal and rubber part, sold individually, rated as "Easy" to install. If damaged, fuel may start leaking from it, and it must be replaced. The part is attached inside of the fuel cap. Refer to your make, model and diagrams to ensure you're choosing the right part.
Your Price
$21.60
   In Stock
Kawasaki Hedge Trimmer Cap-Tank And Breather,Assembly
PartSelect Number PS10038870
Manufacturer Part Number 99996-6101
The Fuel Tank Cap and Breather is an assembly made up of black plastic parts. You'll know if you need a new one if fuel is leaking, and this appears to be the source. This can happen due to normal wear, fatigue, and damage. This kit is rated as "Easy" to install and attaches to the fuel tank. Refer to your make, model and diagrams to ensure you're choosing the right part.
Your Price
$6.40
   In Stock
Kawasaki Hedge Trimmer Element-Air Filter
PartSelect Number PS9258490
Manufacturer Part Number 11013-2208
Your Price
$4.99
   In Stock
Kawasaki Hedge Trimmer Tube
PartSelect Number PS9158573
Manufacturer Part Number 92191-2154
Your Price
$12.82
   In Stock
Kawasaki Hedge Trimmer Pump-Priming
★★★★★
★★★★★
1 Review
PartSelect Number PS8977546
Manufacturer Part Number 49043-2067
The Primer, or priming pump, is a plastic part that attaches to the carburetor. It's rated as "Easy" to install by most of our customers. This part is used to pump fuel from the fuel tank to the carburetor or to start the engine. If damaged, it will no longer pump fuel. It may also be physically, noticably broken. Replace this part if damaged. Check your make, model and diagrams to ensure you're choosing the right part.
Your Price
$11.30
   In Stock
Kawasaki Hedge Trimmer Element-Air Filter
PartSelect Number PS9880815
Manufacturer Part Number 11013-2245
This air filter is designed for use with various makes and models of small engine lawn equipment and is an individual part. Designed to prevent unwanted dust and debris from entering the carburetor and engine, this air filter can be replaced by simply removing the filter cover and swapping the old for the new. If your equipment has poor performance, it is recommended you swap the air filter as a clogged filter can lead to decreased air in the engine, resulting in a loss of power. When replacing, be sure to read the manual for your model for exact placement and rub a small amount of oil into the filter before installing it.
Your Price
$21.53
   In Stock
Kawasaki Hedge Trimmer Pump-Priming,Carburetor
PartSelect Number PS8979273
Manufacturer Part Number 49043-2074
Your Price
$7.59
   In Stock
Kawasaki Hedge Trimmer Spring, Recoil
PartSelect Number PS9159621
Manufacturer Part Number 92145-2128
A recoil spring, also known as a recoil starter spring, is a tightly wound spring that is designed to be pulled and used within startup mechanisms of various models of outdoor power equipment, such as trimmers, edgers and leaf blowers. The spring is one part of a whole system, including a pulley and spool which is what a user will pull, before the recoil spring retracts it. This recoil spring is compatible with various makes and types of power equipment, and is sold as an individual OEM part, without any other hardware. This spring measures approximately 3/4-inch when wound and is made of high-quality metal. If you notice that your starter mechanism is not retracting properly, or does not have enough tension on it, the spring may be worn out or broken, which can happen over time and through normal wear and tear. Depending on your equipment, the replacement process will look different for this spring, so reference your user manual for the exact location.

Kawasaki Hedge Trimmer Appliance Types

Related Kawasaki Hedge Trimmer Parts

Popular Kawasaki Hedge Trimmer Models

Below are the most popular Kawasaki Hedge Trimmer models we have. Enter your model number in the search box to find your model.