Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 4 at 11:59pm EST.
Hotpoint Refrigerator Springs and Shock Absorbers
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
![Hotpoint Appliance Parts](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/images/brands/250/hotpoint.png)
Popular Hotpoint Refrigerator Springs and Shock Absorbers
Your Price
$9.16
In Stock
Hotpoint Refrigerator Recess Door Spring
This was a simple fix. The solenoid had stopped working, so it would not automatically close the door flap. I read some posts on this site that suggest that you had to remove the trim around the entire dispenser to get at the solenoid. My fridge may be a newer model, but in any event it was much easier than that. Just below the touch pad for choosing water, ice, or crushed ice (above where the ice/water dispenses) there are three very small holes spaced about an inch a part. After unplugging the fridge, I stuck a small philips-head screw driver in each, freeing spring clips. That allowed the touch pad to come off. I then removed four screws to remove a plastic piece covering the chute, giving me access to the flap and solenoid. I just unplugged the solenoid from the circuit board on the back of the touch pad and then removed three screws to remove the old solenoid. I replaced it with the new solenoid and plugged it into the circuit board. The touch pad then snapped back into place.
The hardest part was figuring out how to get at the solenoid. After I found that pushing the clips in those three holes allowed me to remove the touch pad, it could not be any easier. Read more...
PartSelect Number PS285013
Manufacturer Part Number WR02X10585
This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find the spring in the water dispenser assembly, behind the main control panel. If the dispenser lever is malfunctioning or the dispenser ice door is not closing, you may need to replace this door recess spring.
Fixes these symptoms
- Door latch failure
- Door Sweating
- Door won’t open or close
- See more...
Installation Instructions
Bill from Cleveland Heights, OH
flap to ice dispenser would not close
The flap to the ice dispenser would not close, which allowed the ice dispenser to frost up, freezing the water dispenser.This was a simple fix. The solenoid had stopped working, so it would not automatically close the door flap. I read some posts on this site that suggest that you had to remove the trim around the entire dispenser to get at the solenoid. My fridge may be a newer model, but in any event it was much easier than that. Just below the touch pad for choosing water, ice, or crushed ice (above where the ice/water dispenses) there are three very small holes spaced about an inch a part. After unplugging the fridge, I stuck a small philips-head screw driver in each, freeing spring clips. That allowed the touch pad to come off. I then removed four screws to remove a plastic piece covering the chute, giving me access to the flap and solenoid. I just unplugged the solenoid from the circuit board on the back of the touch pad and then removed three screws to remove the old solenoid. I replaced it with the new solenoid and plugged it into the circuit board. The touch pad then snapped back into place.
The hardest part was figuring out how to get at the solenoid. After I found that pushing the clips in those three holes allowed me to remove the touch pad, it could not be any easier. Read more...
Hotpoint Refrigerator Torsion-Fit Spring
PartSelect Number PS2374786
Manufacturer Part Number WR49X10233
This part is the replacement torsion-fit spring for your refrigerator. It is made of metal and is sold individually. The torsion-fit spring provides tension to return the ice funnel back to its normal position after it dispenses ice. If your refrigerator is not dispensing ice or water properly, you may need to replace the torsion-fit spring. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Not dispensing water
- See more...
Installation Instructions
carl from vacaville, CA
ice and water would not dispense at door
first I snapped out control face plate on outside of door. removed the screws for each part,and unplugged the wires at the connectors, replaced new parts and plugged in connectors to new circuit board.I decided to replace the board,switch and solenoid all at the same time, not knowing which part was bad.I have to say it was well worth it! it works better than when it was new!!!! It was a lot easier than I thought it was going to be.
Read more...
Hotpoint Refrigerator SPRING DEFLECTOR INT.
PartSelect Number PS1766053
Manufacturer Part Number WR02X11768
Fixes these symptoms
- Ice maker won’t dispense ice
- See more...
Installation Instructions
Jeffrey from LITTLETON, CO
plastic on auger was broken-wouldn't dispense ice
Excellent video on youtube showing how to replace the auger-Refrigerator and IceMaker Repair - Replacing the Auger Assembly (GE Part# WR17X11705).Very detailed video showing every aspect of this repair. There are many other videos showing this exact repair!!
Read more...
Hotpoint Refrigerator Door Closure Spring
PartSelect Number PS294790
Manufacturer Part Number WR1X2027
Fixes these symptoms
- Door won’t open or close
- See more...
Installation Instructions
Brian from WILLOUGHBY, OH
door won't seal
after replacing the door seal, I couldn't get the new seal to close and stay closed, so I replaced the closing arm and spring. The door will close now but not tightly and it's loosing cold air. So I made and patented a wooden block to put behind the freezer door handle and the refrigerator door handle to keep the doors closed. Available in black, white and natural tan. (just kidding about the patented part, but not the block)
Read more...
Hotpoint Refrigerator Feeler Arm Spring
PartSelect Number PS297469
Manufacturer Part Number WR29X5181
Hotpoint Refrigerator Recess Duct Spring
PartSelect Number PS297771
Manufacturer Part Number WR2X3951
Related Hotpoint Refrigerator Parts
- All Hotpoint Refrigerator parts
- Hotpoint Refrigerator Brackets and Flanges
- Hotpoint Refrigerator Caps and Lids
- Hotpoint Refrigerator Circuit Boards and Touch Pads
- Hotpoint Refrigerator Compressors
- Hotpoint Refrigerator Dispensers
- Hotpoint Refrigerator Door Shelves
- Hotpoint Refrigerator Doors
- Hotpoint Refrigerator Drawers and Glides
- Hotpoint Refrigerator Elements and Burners
- Hotpoint Refrigerator Grilles and Kickplates
- Hotpoint Refrigerator Handles
- Hotpoint Refrigerator Hardware
- Hotpoint Refrigerator Hinges
- Hotpoint Refrigerator Hoses and Tubes
- Hotpoint Refrigerator Ice Makers
- Hotpoint Refrigerator Knobs
- Hotpoint Refrigerator Lights and Bulbs
- Hotpoint Refrigerator Motors
- Hotpoint Refrigerator Seals and Gaskets
- Hotpoint Refrigerator Switches
- Hotpoint Refrigerator Thermostats
- Hotpoint Refrigerator Trays and Shelves
- Hotpoint Refrigerator Valves