Frigidaire Microwave Oven Combo Hardware

Frigidaire Microwave Oven Combo Steel Washer This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter. This washer is an OEM part, made of steel, which is sourced directly from the manufacturer. This specific steel washer is used with your range, to secure the inner and outer door together and to secure the oven door handle back in place. Users have ranked this repair as a simple installation that should take you less than fifteen minutes to complete.

Frigidaire Microwave Oven Combo SCREW

Frigidaire Microwave Oven Combo Thermostat Bulb Clip This is a bulb clip, also known as a sensor clip or bulb holder, which is designed to hold the thermostat bulb in place within the interior of various models of ovens. This clip is made of metal, measures approximately 1-inch in length and is a genuine OEM part, but is sold by itself and without the thermostat itself. The thermostat bulb, also known as a capillary thermostat, is used to measure the interior temperature of the oven during operation, and this clip secures it. If you notice your oven heats unevenly, too little or too much, this clip may be rusted, broken or damaged and causing the thermostat bulb to not detect the internal temperature properly. To replace this clip, you will likely need your user manual and a screwdriver and/or wrench. You will first need to disconnect your oven from the wall outlet and remove it from the wall. Use your user manual to locate the thermostat and use your screwdriver and/or wrench to remove the panel covering it. Here, you can likely replace the old clip with the new one, and then reassemble your oven.

Frigidaire Microwave Oven Combo Fan Blade Retainer Nut This fan blade retainer nut in your oven secures the fan blade onto the motor shaft, preventing it from coming loose during operation. You can typically find it at the back of your oven behind a cover. If you notice that the fan blade becomes wobbly or does not rotate smoothly, or your oven starts to make rattling or scraping sounds, the nut may be damaged. If the fan blade cannot spin properly, your food may cook unevenly. Your oven will also work harder and consume more energy to maintain the desired temperature. To access the nut, you will need to remove the back panel of your oven. Remove any screws or release any clips holding it using a screwdriver. To remove the nut itself, you will need either a wrench or a pair of pliers to loosen it from the motor shaft. The fan blade is sold separately from this genuine OEM nut.

Frigidaire Microwave Oven Combo SCREW Sold Individually.

Frigidaire Microwave Oven Combo Screw This is an authentic mounting screw, which works with ranges, wall ovens, cooktops and warming drawers.

Frigidaire Microwave Oven Combo SCREW

Frigidaire Microwave Oven Combo Oven Door Handle Mounting Screw

★★★★★

★★★★★

1 Review

*Sold Individually. Washerhead Screw 10 - 24 x 1.81

Frigidaire Microwave Oven Combo SCREW

Frigidaire Microwave Oven Combo SCREW