Frigidaire Dryer Circuit Boards and Touch Pads

Frigidaire Appliance Parts

Popular Frigidaire Dryer Circuit Boards and Touch Pads

Your Price
$210.04
  In Stock
Frigidaire Dryer Control Board
★★★★★
★★★★★
3 Reviews
PartSelect Number PS12728777
Manufacturer Part Number 134557201NH
This board no longer comes with housing. Customers must reuse the existing housing.
Fixes these symptoms
Installation Instructions
Brent from Bend, OR
Dryer would not stay on one setting and lights would go nutty
Figured the board was bad since the settings would change if you touched the plastic face lightly.

Disconnected the power!

Removed the 2 screws off the back of the dryer top panel.

removed the 4 screws off the control face plate to access the Circuit board.

Disconnected the pc connectors and spade plugs (making sure to put them on the same spot on the old one).

Took the clock out of the original, LED light bars, front knob etc and put them into the replacement assembly.

Reinstalled and plugged in power.
Read more...
Your Price
$229.93
  In Stock
Frigidaire Dryer Control Board - No Housing
★★★★★
★★★★★
1 Review
PartSelect Number PS12724036
Manufacturer Part Number 134523200NH
This part has been updated by the manufacturer and no long comes with the white plastic housing.
Installation Instructions
Thomas from Mauldin, SC
White magic smoke came out of front.
I removed two screws at the rear top, slid the top back. Then removed the screws holding the front face on. The circut board had a few screws holding it on. I removed them and detachted the wires, then installed the new board. I then reassembled the front and the wires. I put it back together and plugged it in. Everything lit up and the dryer was fixed. HORRAY! My wife was happy again. Daddy saves the day, not to mention the repair cost.! Read more...
Your Price
$279.41
  In Stock
Frigidaire Dryer CONTROL BOARD
PartSelect Number PS10063119
Manufacturer Part Number 809160902
Installation Instructions
Ralph from CHICKASHA, OK
broken plastic start button on the control module.
I took the old one out and put the new one in. Sorry, I have some mechanical abilities but not much in giving detailed instructions on how I did it. I will say there are some little metal tabs that you have to bend back to get the old one out and then bend them back in place to hold the new part in. Like you find on some picture frames. The part came in just a few days after I ordered it. Read more...
Your Price
$207.46
  In Stock
Frigidaire Dryer CONTROL
★★★★★
★★★★★
3 Reviews
PartSelect Number PS12728776
Manufacturer Part Number 134557200NH
Fixes these symptoms
Installation Instructions
Scott from FLORENCE, OR
Dryer display was showing E68 error code, and responding erratically to attempts to reset.
First, I had to decide if it was reasonable to attempt the repair. Was it worth spending $160 to see if that would fix it, or would I just find out I'd have to start fresh and buy a new dryer, in which case the cost of the (failed) repair would add to the total cost. I was sure enough a new Control was the answer, the decision was to go ahead.

I was concerned about getting the right part, but between your search feature that assured me my selection "will fit your unit", and the option to return the part if it wasn't right, I felt confident enough to order it. Also I was concerned about having good instructions to follow, but there was a YouTube video that showed all the details clearly. The included written instructions gave the general sequence to follow, but weren't for my specific model.

The actual repair was easy. Because the washer and dryer were stacked, it was harder to get to the back screws than in the YouTube video. I stood on a stepladder, and used an awl (with a mirror) to line up the holes when re-securing the top lid because I couldn't see them directly. I compared the new Control with the old by looking through the anti-static bag. If it looked wrong I wanted to be able to return it, and it had to be unopened to do so. Undoing the connectors, unscrewing the frame pieces holding the board, swapping out the boards, and putting it all back together went fine with the help of the video. I would recommend marking the old board to avoid installing it again by mistake. No, I didn't do that, but the old board was hardly dirty or worn and didn't look much different than the new one. Also, I didn't drop any of the screws, but if you do and they go down behind the unit or into it, one of those magnetic telescoping hardware retrievers might be useful.

That fixed it! 160 bucks instead of whatever a new dryer costs these days is a good tradeoff, and a whole lot less aggravation. It's been working fine ever since.
Read more...
Your Price
$242.16
  In Stock
Frigidaire Dryer Timer
PartSelect Number PS418620
Manufacturer Part Number 131719100
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Your Price
$210.73
  In Stock
Frigidaire Dryer Timer
PartSelect Number PS416776
Manufacturer Part Number 131062300
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Installation Instructions
Bobby from Blue Ridge, TX
Timer would not shut dryer off.
A few screws out of the back of the top panel, pulled the dial off. Removed two more screws and the timer assembly came off. Then I just matched the color wires one at a time to the same spots on the new assmbly. Read more...
Your Price
$336.65
  Special Order
Frigidaire Dryer CONTROL BOARD
PartSelect Number PS3490385
Manufacturer Part Number 137070600
Your Price
$295.90
  In Stock
Frigidaire Dryer Electronic Control Board
PartSelect Number PS3490386
Manufacturer Part Number 137070870
Your Price
$262.21
  In Stock
Frigidaire Dryer Electronic Control Board
PartSelect Number PS10057458
Manufacturer Part Number 809160802
Your Price
$287.59
  In Stock
Frigidaire Dryer Timer - 60 Hz.
PartSelect Number PS462374
Manufacturer Part Number 5303297177
Installation Instructions
Charles from Bowling Green, OH
Timer did not work and the knob was broken too
The job was very easy, I just unscrewed the back of the unit (6 screws) and the two screws securing the timer in the front. I then disconnected the timer. All I had to do was reverse the process and I was done. It took less than 15 minutes. Read more...

Related Frigidaire Dryer Parts