Crosley Freezer Switches

Videos!

Your Price

$38.37

Crosley Freezer Refrigerator Door Switch

★★★★★

83 Reviews

PartSelect Number PS12728638

Manufacturer Part Number W11384469

Door switch turns the light off when you close the door.

Fixes these symptoms

Light not working
See more...

Installation Instructions

Clint from Rayville, MO

Lights inside refrigerator not working

I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. Read more...

Videos!

Your Price

$53.48

Crosley Freezer Run Capacitor

★★★★★

8 Reviews

PartSelect Number PS2333670

Manufacturer Part Number 5304464438

The run capacitor helps the compressor kick on and off while maintaining a constant temperature in your fridge and freezer. You may need to replace your run capacitor if your refrigerator or freezer section will not start, if they are too warm, or if your refrigerator has become too noisy. Replacing the run capacitor is a relatively easy project. For this repair you will only need a 1/4 inch nut driver and needle nose pliers. Remember to disconnect the power and water supply line to the unit before you begin this repair. For full step by step instructions, simply click on the video below.

Fixes these symptoms

Clicking sound
Doesn’t stop running
Freezer section too warm
See more...

Installation Instructions

Jim Meeks from Wimberly, TX

The controller (current relay) burned up

1. Unhooked a retaining wire that secures the controller to the compressor terminal box. 2. removed destroyed part. 3. Got the model and serial numbers and got online. 4. Ordered part 5. Waited a couple of weeks to get part 6. Found that the manufacturer had daisy chained a bunch of components together with some funny deep socket plugs that by themselves are not routinely found so rather than buy a laundry list of unnecessary parts to get the aforementioned plus and make my customer wait a couple of more weeks I chose to connect the wires to a couple of high temperature female stainless steel quick connectors and feed the wires directly into the controller. Fortunately the controller had the polarity marked on the housing. (L for Line was the hot lead and C was for common the neutral lead) Failure to follow proper polarity will damage the part and could kill the compressors's start wimding. Read more...

Your Price

$64.43

Crosley Freezer SWITCH

★★★★★

6 Reviews

PartSelect Number PS427069

Manufacturer Part Number 216822900

This part turns the light on/off as the door opens and closes.

Fixes these symptoms

Light not working
See more...

Your Price

$64.50

Crosley Freezer CONTROLLR

PartSelect Number PS12731378

Manufacturer Part Number 216954235

The start relay briefly kick starts the compressor, and then shuts off as soon as the motor gets up to speed.

Fixes these symptoms

Clicking sound
Will Not Start
Won’t start
See more...

Installation Instructions

Harry from Rockwall, TX

Refrigerator was trying to cycle compressor on, but each time the compressor started, it would stop due to the thermo breaker would open. The fans continued to run, so I figured it was starter relay.

Moved the refrig. out, removed the four screws that held the lower access panel in place. Disconnected the power cord. Removed the retainer clip wire and pulled the relays from the compressor socket. Separated the relays and installed the secondary relay on the new starter relay. Reinstalled the starter relay assembly into the compressor socket. Plugged the power cord in and listened for the compressor to cycle on. It cycled on and continued to run. Turned the power off and reinstalled the retainer clip wire. Reinstalled the access panel and plugged the power back in and left the refrig. run overnight. Checked temperature and also started the ice maker. Everything was normal by morning. Read more...

Videos!

Your Price

$58.87

Crosley Freezer Run Capacitor

★★★★★

3 Reviews

PartSelect Number PS817298

Manufacturer Part Number 218909912

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

Fixes these symptoms

Freezer section too warm
Fridge and Freezer are too warm
Fridge too warm
See more...

Installation Instructions

eric from inglewood, TN

Faulty Controller and Possibly Capacitor

After building a test box and determining the Controller was bad simply ordered parts and installed. Installation was a little difficult due to locking spades on electrical connections.

Unplug all power from freezer. Remove Bail wire from controller capacitor unit and remove from compressor by pulling STRAIGHT from compressor body to avoid bending contacts.

Use a very small instrumentation screwdriver to release locking spade on yellow and white wires. To unlock slide screwdriver in slot along wire entry to controller body while gently pulling on wire. Note position of wires and replace on new unit in same position/order. Plug new run capacitor into new controller being careful to orient capacitor to proper position (hole matches guide on controller unit). Plug newly installed controller and capacitor into condensor and replace bail wire.

Make sure timer is not in defrost mode - manually advance timer if necessary to ensure timer is in run mode. Turn temperature control to coldest setting. Plug in and hopefully enjoy the humming noise of your newly repaired and operational compressor and freezer. Read more...

Your Price

$53.26

Crosley Freezer Compressor Controller

PartSelect Number PS2331301

Manufacturer Part Number 216954214

Also known as the start device/relay. This part briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.

Fixes these symptoms

Won’t start
See more...

Installation Instructions

albert jr from Gig Harbor, WA

power surge, burnt out Freezer Main Control Board PS3502429

Used putty knife to pop out old control board. Which is located on the front of the freezer door. The hard part was determining that this was the problem in the first place. I first replaced the compressor controller and the Run Capacitor. compressor still would not start. when I installed the new control board, it ran perfect. Read more...