Troy-Bilt Blower Parts

Popular Troy-Bilt Blower Parts

Your Price
$22.96
   In Stock
Troy-Bilt Blower Primer and Hose Assembly
PartSelect Number PS10014772
Manufacturer Part Number 791-683974B
This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages. If they are not functioning, these parts will fail in their function of supplying fuel from the tank to the carburetor. This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.
Fixes these symptoms
Your Price
$16.80
   In Stock
Troy-Bilt Blower Fuel Line and Filter
★★★★★
★★★★★
2 Reviews
PartSelect Number PS10014709
Manufacturer Part Number 791-682039
This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part of proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.
Fixes these symptoms
Installation Instructions
Howard from NEWBURGH, IN
Dry rot hoses
Took off old and new parts went right in place. Read more...
Your Price
$7.90
   On Order
Troy-Bilt Blower Impeller Assembly
PartSelect Number PS16429077
Manufacturer Part Number 753-08491
This is an impeller assembly kit designed for use with various models of leaf blower and comes with all the hardware necessary to replace it, including the impeller, the securing nut and 1 washer for each side of the impeller. If you notice the blowing power of the leaf blower is reduced or that there is any physical damage to the impeller like bent or cracked blades, the impeller needs to be replaced immediately. When replacing the impeller, you will need a screwdriver or wrench to remove the impeller cover, and you should ensure you use proper safety equipment like gloves.
Your Price
$7.14
   In Stock
Troy-Bilt Blower Fuel Return Line
★★★★★
★★★★★
2 Reviews
PartSelect Number PS9137685
Manufacturer Part Number 791-181086
The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor. This part is sold individually, and you will know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks. Most customers rated this repair as easy.
Installation Instructions
Howard from NEWBURGH, IN
Dry rot hoses
Took off old and new parts went right in place. Read more...
Your Price
$4.14
   In Stock
Troy-Bilt Blower Air Filter
PartSelect Number PS10014105
Manufacturer Part Number 791-181757
This is a foam air filter designed for use within various models of outdoor power equipment like trimmers and leaf blowers. This foam filter measures approximately 3-inches in length and fits within the air filter assembly to prevent contaminants from entering your equipment. Air filters commonly build up with dust and dirt over time, and will need to be replaced every so often, and regularly inspecting them for build ups can reduce the amount of extra maintenance that is required. If your air filter is clogged, it will lead to worse performance from your equipment, like difficulty starting or not starting at all, and can even damage the carburetor and engine. To replace the air filter, remove the cover for the air filter housing, and remove and dispose of the old filter. Rub a small amount of oil into the new filter before installing it and securing the air filter cover.
Your Price
$10.65
   In Stock
Troy-Bilt Blower Air Cleaner Filter
PartSelect Number PS10013535
Manufacturer Part Number 791-180350B
The manufacturer-certified Air Cleaner Filter is a grey foam filter used to prevent debris and dirt from entering the carburetor and engine, causing damage. Installation is rated as "Easy". This filter may become clogged and cause the engine to run rough due the restricted air flow, at which time the filter should be replaced. This filter is placed inside the air cleaner housing.
Your Price
$77.55
   Special Order
Troy-Bilt Blower Vacuum Bag Assembly, Oval Inlet
PartSelect Number PS10009211
Manufacturer Part Number 753-04465
This replacement vacuum bag collects and stores debris in your handheld blower. It is made from fabric and has an oval inlet and a fastening mechanism. A broken vacuum bag will leak or have visible tears, holes, or frayed edges. If it becomes clogged, you may notice reduced suction from your blower. It is strongly recommended to replace a broken vacuum bag assembly promptly, as debris can escape during blower operation. To remove the bag, locate its attachment point. You need to depress the two tabs at the oval end of the bag to release it from your machine. Please be aware that this authentic OEM vacuum bag is sold individually.
Your Price
$26.85
   In Stock
Troy-Bilt Blower Lawn Mower Ground Drive Belt
★★★★★
★★★★★
1 Review
PartSelect Number PS9172714
Manufacturer Part Number 954-04032B
3/8 x 36-1/8-inch This ground drive belt (part number 954-04032B) is for lawn mowers. Ground drive belt 954-04032B drives the transmission, which propels the lawn mower wheels. Wear work gloves to protect your hands when installing this part.
Your Price
$10.14
   In Stock
Troy-Bilt Blower Fuel Pick-Up Line with Filter
★★★★★
★★★★★
1 Review
PartSelect Number PS10014339
Manufacturer Part Number 791-182353
The Fuel Pick Up Line with Filter is an OEM plastic part used to filter and deliver fuel to the carburetor. If broken, the engine will not get fuel and the part should be replaced. This part is rated "Easy" to install and only requires a set of pliers.
Your Price
$16.68
   Special Order
Troy-Bilt Blower Power Connection Wire Assembly
PartSelect Number PS10014481
Manufacturer Part Number 791-182547

Troy-Bilt Blower Appliance Types

Popular Troy-Bilt Blower Models

Below are the most popular Troy-Bilt Blower models we have. Enter your model number in the search box to find your model.