Part Location Diagram of 285811 Whirlpool Agitator Repair Kit
See part 9 in the diagram
Replacing your Whirlpool Washer Agitator Repair Kit
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Agitator Repair Kit 285811

★★★★★
★★★★★
203 Reviews

Rated by 363 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 14.01
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS334650
Manufacturer Part Number 285811
Manufactured by Whirlpool for Whirlpool, KitchenAid, Roper, Estate
Product Description

Agitator Repair Kit Specifications

This kit (Medium Cam Agitator Repair Kit, Washer Agitator Cam Repair Kit, Cam Agitator) is used to repair the agitator. These parts are located inside the agitator auger near the top. You will need to remove the softener dispenser first if your model is equipped with one. This part is driven by the output shaft of the transmission to move the clothes during a wash cycle. The agitator auger rotates one way but not the other, which forces the laundry down and out for a constant tumbling during the wash cycle. The agitator is subjected to a lot of force during the washer wash cycle. Constant and frequent use of the appliance can cause damage, especially during heavy loads. If you’re experiencing a noisy agitator, or an agitator that spins freely in both directions, then it may be in need of repairs. If your agitator is no longer agitating properly, your clothes will not tumble, and will not be washed properly. The agitator repair kit includes an agitator cam, 4 directional cogs, a bearing, thrust spacer, inner cap seal, and a washer. It is constructed of plastic and rubber, and comes in black/white.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos
Difficulty: Easy | Tools Required: Socket set,Screw drivers
Repair Tip: You may need agitator grease for this repair.

Replacing your Whirlpool Washer Agitator Repair Kit

Replacing your Whirlpool Washer Agitator Repair Kit
Troubleshooting
This part fixes the following symptoms:
Will not agitate | Spins slowly | Does not dispense fabric softener or detergent | Spinning Issues
This part works with the following products:
Washer.
Part# 285811 replaces these:
AP3138838, 2744, 285811, 285746, 285811VP, 3347410, 3351001, 3363663, 3948431
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
203 Reviews
4.8
Filter By Rating:
  • 5 Stars
    172
  • 4 Stars
    22
  • 3 Stars
    4
  • 2 Stars
    4
  • 1 Star
    1
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 363 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Washer would drain but not spin
Pulled up on fabric softener dispenser and removed it. Had to use pliers to remove cap and seal to get access to the bolt holding the agitator in.

Realized my socket extension wasn’t long enough so went to Lowe’s and bought another.

Was unable to hold the bottom of the agitator to keep it still and get enough leverage to remove the bolt. I poured hot water over it and then climbed into the washer and used my foot to hold the vanes still while I removed the bolt. Once I got the agitator out, the rest was a breeze. Separated the top of the agitator from the bottom by placing it on the floor, using my feet to hold it down and pulling up to remove the top part of the agitator.
Turned the top of the agitator upside down and removed the cam and feed dogs. Assembled the new one and held the agitator top horizontally while placing the new part back in.
Reassembled the top and bottom of the agitator and put it back into the washer. Tightened the bolt, replaced the cap with its seal and pressed the fabric softener dispenser back into place.
  • Debby from STATESVILLE, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Splines on lower agitator bad, worn.
Had to clean debris on metal drive shaft splines in orderv forvnew lower agiitator to seat properly. Install upper agitator and parts then reinsert bolt in upper agitator. Install cap and o-ring, fabric softner dispenser and test for proper operation.
Other Parts Used:
Agitator Repair Kit Agitator Kit
  • Eugene from KENNER, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator did not work
The repair was exactly like the instruction vidio
  • Stephen from WINTER PARK, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top part of agitator was not agitating clothes.
Took off water softener from top of agitator. Pulled up and removed cap with O-ring that covered bolt that held agitator in place.then pulled briskly up on entire agitator from the bottom to remove agitator from machine.After that I put my feet on bottom of agitator and then pulled up on top part to separate the two pieces. After that just follow instruction sheets for parts replacement and then reverse steps to reassemble.
  • Dan from BLOOMINGTON, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator not turning on the top
I ordered a whole agitator repair kit. Had a few problems getting everything to line up right.Finally figured out what I needed to do and everything worked like it should.
  • patrick from LA PINE, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator dogs broken
Super easy. Watch the video on YouTube.
  • Billy from SILVER CITY, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
AGITATOR NOW FUNCTIONING
Pulled the agitator unit from the washer, popped the top, pulled damaged part and replaced. Easy job!! Great video installation instructions! Thank you.
Other Parts Used:
Seal, Inner Cap Agitator Repair Kit
  • LINDA from COTTAGE GROVE, OR
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set, Wrench (Adjustable)
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator did not move
Replaced agitator sprage kit. Simple instructions simple repair
  • Freedom Ford / Rick from MCALESTER, OK
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Parts wore out
Used a socket undid put in new parts took 5 min washer like brand new
Other Parts Used:
Upper Agitator Agitator Repair Kit
  • joan from WOODLAND, WA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not agitate
I ordered the part and watched the installation video. It would have helped if I had watched the video all the way through at least once. Instead I paused and restarted it as I did the repair. As a result I had a hard time putting the agitator back together. Otherwise it was a fairly easy repair and my 20-year-old washer works great again!
  • Beverly from MONUMENT, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Wrench (Adjustable)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

38 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shannon
July 20, 2017
How do you rate your cam size? This kit is called the medium cam agitator repair kit but I don’t know what size cam I have ….
PartSelect logo
Hi Shannon, great question! A medium cam kit 285811 (which is this part) is the most common, and is approximately 2.25 inches. We recommend either measuring your old cam, or entering your model number to confirm which size you need. For the long cam agitator kit you can order this 285748, for the short cam agitator kit you can order this 285809. I hope this helps.

34 people found this helpful.

Was this helpful?
Thank you for voting!
Cynthie
July 20, 2017
If I put anything more than a small load in my washer the agitator will not spin. Does that mean I need a new agitator or is there any way I can repair it?
PartSelect logo
Hi Cynthie, if your cam kit is faulty it could cause the washer to not agitate properly. I would check the cams first. Please let us know if you have any further questions.

17 people found this helpful.

Was this helpful?
Thank you for voting!
Mark
April 14, 2018
The lower section of my washer's agitator works fine. The upper section does not move with a load of clothes. It will turn in a clockwise direction with just water in the tub but if I simply grab a hold of it, it will not move at all. If I apply any sideways pressure on the upper agitator towards the tub wall it engages even with a full load of clothes and will start agitating but as soon as i stop applying the pressure the upper agitator stops moving. What parts would you recommend?
For model number LXR7144EQ1
PartSelect logo
Hello Mark, Thanks for your question. This is most likely due to worn-out agitator directional cogs, otherwise known as the "dog ears". The part number is PS388034. If they seem intact, the agitator repair kit or the drive motor coupling may be worth checking as well. I hope this helps.

12 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Tam
February 6, 2018
Bought agitator repair kit #ps334650 from you and got it all installed per your video but the bottom part of the agitator is going in a clock wise direction and the top i can hold onto the top portion of the agitator and it is not catching and pushing the clothes back down. Any suggestions? Could it be that the inside of the top agitator teeth are worn out since they have new dogs? Can i get that part for the washing machine? Thank you for your help
For model number KAWE565BWH0
PartSelect logo
Hi Tam, Thank you for your question. If the washer is not agitating correctly, there are some parts that you will need to check to see which one is causing the issue. You will need to check the agitator directional cogs, the direct drive motor coupling, the thrust spacer, the clutch assembly and the lid switch. I hope this helps. Thank you and have a great day!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Virginia
May 15, 2019
Is there a way to check to see what part is needed
For model number rtw4516fw1
PartSelect logo
Hello Virginia, thank you for contacting us. With the model number for your appliance and a brief description of the symptom it is experiencing, we are able to do some troubleshooting and find possible parts to fix it. We look forward to hearing back from you.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Byron
July 20, 2017
With this repair I’ve been kinda guessing at what I need to do but now that the parts are here I need to get the agitator removed and install the agitator repair kit. Do you have any recommendation before I start?
PartSelect logo
Hi Byron, first you should remove the agitator, then inspect the agitator shaft for damage or rust. If it is bad the complete gearcase will need to be replaced. Next you can install your agitator and cam kit. Best of luck with this repair!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Gayla Mccallister
July 31, 2017
My washer fills with water but will not agatate,what parts do i need ?
PartSelect logo
Hello Gayla, that is a great question. If the washer will not agitate after filling with water, most of the time it is the lid switch/latch. If that part is faulty it will not allow the washer to start agitating since the door is unable to lock. Hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Ken
August 17, 2017
I replaced couplers, and agitator kit with cogs, but washer still isn't agitating all that well. Any thoughts : Trans, clutch maybe?
For model number ETW4400WQ1
PartSelect logo
Hello Ken, Thank you for contacting us. It seem that the clutch is most likely the issue. I hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Kenny
January 14, 2019
Washer shakes and moves around during spin cycle
For model number NTW4600YQ1
PartSelect logo
Hello Kenny, Thank you for the question. I suggest checking the Suspension Rod Kit, PartSelect Number PS11703290. There is also a How To Video on the site to help with the repair. Hope this helps, good luck with this repair!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Dave
November 28, 2018
Our washer seems to be working fine but it starting making a high pitch noise during the agitation cycle. Can you recommend where to start to fix this before we start seeing more symptoms and bigger problems? Thanks
For model number 10092582100
PartSelect logo
Hello Dave, Thank you for the question. The most common issue would be worn down Direct Drive Motor Couplings, PartSelect Number PS1485646. You can also check the Cogs,PartSelect Number PS388034, Clutch Assembly, PartSelect Number PS334641 and the Drive Block, PartSelect Number PS11741977. Hope this helps, good luck with this repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
  • 3
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS334650
Manufacturer Part Number: 285811
Brand
Model Number
Description
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11020232712
Washer - Kenmore 11020232712 Laundry Residential Washer
Kenmore
1102071299
Washer - Kenmore Washing Machine Model 110.2071299 (1102071299, 110 2071299) Parts
Kenmore
1102086299
Washer - Kenmore Washing Machine Model 110.2086299 (1102086299, 110 2086299) Parts
Kenmore
1102087299
Washer - Kenmore Washing Machine Model 110.2087299 (1102087299, 110 2087299) Parts
Kenmore
1102371220
Washer - Kenmore Washing Machine Model 110.2371220 (1102371220, 110 2371220) Parts
Kenmore
11026058590
Washer - Kenmore Washing Machine Model 110.26058590 (11026058590, 110 26058590) Parts
Kenmore
11026152500
Washer
Kenmore
1102690290
Washer - Kenmore Washing Machine Model 110.2690290 (1102690290, 110 2690290) Parts
Kenmore
11026902962
Washer - Kenmore Washing Machine Model 110.26902962 (11026902962, 110 26902962) Parts
Kenmore
1102882790
Washer - Kenmore Washing Machine Model 110.2882790 (1102882790, 110 2882790) Parts
Kenmore
11029601690
Washer - Kenmore Washing Machine Model 110.29601690 (11029601690, 110 29601690) Parts
Kenmore
11029802891
Washer - Kenmore Washing Machine Model 110.29802891 (11029802891, 110 29802891) Parts
Kenmore
11098762790
Washer Dryer Combo - Kenmore Washer/Dryer Combo Model 110.98762790 (11098762790, 110 98762790) Parts
Kenmore
1109975820
Washer Dryer Combo - Kenmore Washer/Dryer Combo Model 110.9975820 (1109975820, 110 9975820) Parts
Whirlpool
1CLSR7010PQ0
Washer - Residential
Whirlpool
1CLSR7010PQ1
Washer - Residential
Whirlpool
1CLSR7333PQ0
Washer - Residential
Whirlpool
1CLSR7333PQ1
Washer - Residential
Whirlpool
1CLSR9434PQ0
Washer - Residential
Whirlpool
1CLSR9434PQ1
Washer - Residential
Whirlpool
1CLSR9434PT0
Washer - Residential
Whirlpool
1CLSR9434PT1
Washer - Residential
Whirlpool
1CLXR7244PT0
Washer - Residential
Whirlpool
1CLXR7244PT1
Washer - Residential
Whirlpool
1CWTW4845EW0
Washer - WASHER
Whirlpool
1CWTW4845EW1
Washer - WASHER
Whirlpool
1CWTW4845EW3
Washer
Whirlpool
1CWTW5100VQ0
Washer - Residential
Whirlpool
1CWTW5100VQ1
Washer - Residential, Automatic
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service