Part Location Diagram of WD21X31902C GE CONFIGURED UI BOARD
See part 718 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

CONFIGURED UI BOARD WD21X31902C

★★★★★
★★★★★
19 Reviews

Rated by 15 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 216.55
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS17137058
Manufacturer Part Number WD21X31902C
Manufactured by GE for General Electric
Product Description

CONFIGURED UI BOARD Specifications

This is the user interface control board for various dishwashers. The user interface panel is what you directly interact with on your dishwasher to start and stop it and select the specific cycle you want. If your user interface panel is not responding and you have tested your dishwasher to ensure no other part could be at fault, it will need to be replaced immediately for it to regain function. Replacing this panel will requires some disassembly of your dishwasher, and will require tools like a screwdriver, wrench, and a pair of pliers. This OEM user interface panel measures approximately 14-inches wide and is sold individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
Part# WD21X31902C replaces these:
WD21X22175, WD21X22236, WD21X22804, WD21X22955, WD21X22956, WD21X23462, WD21X23702, WD21X23709, WD21X26178, WD21X31902, WD21X32000
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
19 Reviews
4.8
Filter By Rating:
  • 5 Stars
    16
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 2.7 / 5.0, 15 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
Interface Control board was not working
I follow a YouTuber who had a semillar GE dishwasher model number. He was very helpful through the repair process.
  • Daniel from BAKERSFIELD, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No power indications to top UI board
Diagnosing was probably the most difficult, as I am an experienced electronic tech for 40 years. through research i found that the schematics and service paperwork was included with my dishwasher mine was located in the front left corner of the frame behind the kick panel. These service instructions were ok for guide but not really helpful in troubleshooting this fault. I found online the pinout output voltage from the main control board needed to be checked. however, this is not very easy to get a proper reading safely in such an awkward position. I ultimately scored the insulation back enough to get a set of clip leads and connect to my meter and obtain a reading. In my case there was voltage. I ordered the board and it arrived quick and installed. I cut and spliced together the wires I scored to make a reading but added an extra length of wire for service testing in the future.
  • Robert from EAST SYRACUSE, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
13 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No power at display panel
I ordered the part recommended.Replaced,still no power.The next part was going to be another $175.00.It was better to stop and get a refund than put $300.00 into a six year old.dishwasher.I should be getting a refund any day now.Parts select was very helpful in that regard.
  • Travis from SUMMERVILLE, SC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
10 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was dead. Power board had correct voltages.
Followed video instructions and all went went well.
  • James from MILLSBORO, DE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control board would not properly work and light up
Followed a u-tube video to remove dish wash door assembly to get to the control board . Not too hard if you are mechanically inclined.
  • Michael from MONMOUTH BCH, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No power to the control panel
Removed the door to get to the UI control panel. Followed the instructions to set the jumpers to my particular model and put it back together. Fixed the issue and worked perfectly.
  • Alan from NEOSHO, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No response from control panel buttons
The problem is described perfectly at the start of this video:
https://www.youtube.com/watch?v=mxPpRjxVyPo

This video, between 5:30 min and 7:10 min of the video, led me to believe it was the user interface module not the master control board.
https://www.youtube.com/watch?v=mxPpRjxVyPo

This video showed me how to replace the UI board on my exact model of dishwasher.
https://www.youtube.com/watch?v=2scYMl-0f8s
  • Paul from DURHAM, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was randomly beeping when not in use. Then eventually the display wouldn’t light up.
I first tested for 120volts to my dishwasher to verify it was getting power from my electrical panel. Then tested pins 2 and 5 on the control board to make sure there was 14 volts going to the user interface harness. After I verified that I knew it was the user interface that was bad. I watched a video I found on YouTube and followed it. This repair was fairly easy while watching the video and making sure that you use the correct pin out that comes in the box for your model. I’m not an appliance repair person and it took me about an hour start to finish. I’m going to attach the video I https://youtu.be/TI8cUjy5YOE

https://www.youtube.com/watch?v=GN5t4VFgLCY
  • Brian from MANSFIELD, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
18 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No illumination on controls and no response from buttons
Shut off power to the unit, removed the front lower trim and under counter screws, then I disconnected the wiring from under the door leading to the UI at the top edge of the door. Removed the front door, separated and disassembled the outer door cover, I then removed the UI control board from its housing and the clear cover and reassembled the parts in reverse order and turned the power back on. FOLLOW the included instructions on connecting the pins on the new UI by cross reference the model number.
  • Carl from Mesquite, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dead dishwasher
It took a little googling and YouTubing to find the problem and solution, but once we had this UI board in hand, the installation was simple.

Most of the labor and little bit of struggle was taking the dishwasher door apart to get to the UI board.

Make sure to follow the instructions in the package to configure for your model, which was straightforward and simple enough to do.

Once the door was back together and reinstalled, she worked like a dream. The display also seems brighter to me. We haven't had the "random singing" that the dishwasher was doing before the original UI board went out either.

You can do this fix!
  • Annie from NEW PHILA, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Melinda
25 days ago
Will this configured UI board fit my dishwasher,or if not,which on will?
For model number GDT655SGJ5BB
PartSelect logo
Hi Melinda, Thank you for your question. Yes, this would be the correct UI board for your dishwasher. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS17137058
Manufacturer Part Number: WD21X31902C
Brand
Model Number
Description
General Electric
GDF610PGJ0BB
Dishwasher - DISHWASHER
General Electric
GDF610PGJ0WW
Dishwasher - DISHWASHER
General Electric
GDF610PGJ2BB
Dishwasher - DISHWASHER
General Electric
GDF610PGJ2WW
Dishwasher - DISHWASHER
General Electric
GDF610PGJ4BB
Dishwasher
General Electric
GDF610PGJ4WW
Dishwasher
General Electric
GDF610PGJ5BB
Dishwasher
General Electric
GDF610PGJ5WW
Dishwasher
General Electric
GDF610PGJ6BB
Dishwasher
General Electric
GDF610PGJ6WW
Dishwasher
General Electric
GDF610PMJ0ES
Dishwasher - DISHWASHER
General Electric
GDF610PMJ2ES
Dishwasher - DISHWASHER
General Electric
GDF610PMJ4ES
Dishwasher
General Electric
GDF610PMJ5ES
Dishwasher
General Electric
GDF610PMJ6ES
Dishwasher
General Electric
GDF610PSJ0SS
Dishwasher - DISHWASHER
General Electric
GDF610PSJ2SS
Dishwasher - DISHWASHER
General Electric
GDF610PSJ4SS
Dishwasher
General Electric
GDF610PSJ5SS
Dishwasher
General Electric
GDF610PSJ6SS
Dishwasher
General Electric
GDF620HGJ0BB
Dishwasher - DISHWASHER
General Electric
GDF620HGJ0WW
Dishwasher - DISHWASHER
General Electric
GDF620HGJ2BB
Dishwasher - DISHWASHER
General Electric
GDF620HGJ2WW
Dishwasher - DISHWASHER
General Electric
GDF620HGJ4BB
Dishwasher
General Electric
GDF620HGJ4WW
Dishwasher
General Electric
GDF620HGJ5BB
Dishwasher
General Electric
GDF620HGJ5WW
Dishwasher
General Electric
GDF620HGJ6BB
Dishwasher
General Electric
GDF620HGJ6WW
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service