YTH21K46 ((96045002600)(2010-10)) Husqvarna Lawn Mower - Overview

Sections of the YTH21K46

[Viewing 10 of 10]
Keep searches simple, eg. "belt" or "pump".
Ring Klip Number T5304-75 – Part Number: 812000029
Ring Klip Number T5304-75
★★★★★
★★★★★
(1)
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It i...
$3.99
  Special Order
Washer 25/32 x 1-1/4 x 16 Ga. – Part Number: 532121749
Washer 25/32 x 1-1/4 x 16 Ga.
★★★★★
★★★★★
(2)
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.99
  On Order
Ground Drive Fixed Idler Pulley – Part Number: 532194326
Ground Drive Fixed Idler Pulley
PartSelect #: PS9016377
Manufacturer #: 532194326
This ground drive fixed idler pulley is for lawn tractors. 910 inch offset Ground drive fixed idler pulley helps apply tension to the drive belt, allowing the belt to turn. Wear work gloves to...
$13.69
  On Order
V-Belt-Drive – Part Number: 532130969
V-Belt-Drive
★★★★★
★★★★★
(1)
PartSelect #: PS9009376
Manufacturer #: 532130969
  No Longer Available
Pulley Idler Flat – Part Number: 532194327
Pulley Idler Flat
PartSelect #: PS9016399
Manufacturer #: 532194327
This flat idler pulley is a genuine OEM replacement part for use in outdoor power equipment. It is made of plastic and features a metal bore adapter, and a radial-style single row bearing. The pulley ...
$13.69
  In Stock
Washer Hardened – Part Number: 532188967
Washer Hardened
PartSelect #: PS9015920
Manufacturer #: 532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and...
$4.99
  On Order
Switch-Ign – Part Number: 532193350
Switch-Ign
★★★★★
★★★★★
(2)
PartSelect #: PS9020864
Manufacturer #: 532193350
This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various fu...
$14.93
  In Stock
Link Lift Susp. Front Mower – Part Number: 532195270
Link Lift Susp. Front Mower
★★★★★
★★★★★
(1)
PartSelect #: PS9021232
Manufacturer #: 532195270
  No Longer Available
Pin Cotter 7/16 Bow Tie Lock – Part Number: 532194209
Pin Cotter 7/16 Bow Tie Lock
PartSelect #: PS9020881
Manufacturer #: 532194209
$3.99
  On Order
Pin Cotter 5/16 Bow Tie Lock – Part Number: 532194208
Pin Cotter 5/16 Bow Tie Lock
PartSelect #: PS9016072
Manufacturer #: 532194208
$3.99
  In Stock
E-Ring Number 5133-75 – Part Number: 812000001
E-Ring Number 5133-75
★★★★★
★★★★★
(1)
PartSelect #: PS9155405
Manufacturer #: 812000001
E Ring Number 5133-75 is a black, metal ring for securing the position of other parts. If damaged it will become loose or fall off. Installation is rated as "Easy" and is done with a pair of pliers. R...
$5.29
  In Stock
Washer Clear Zinc – Part Number: 819191912
Washer Clear Zinc
PartSelect #: PS9144108
Manufacturer #: 819191912
$6.21
  In Stock

Questions And Answers for YTH21K46

Be the first to ask our experts a question about this model!

Common Symptoms of the YTH21K46

[Viewing 2 of 2]
Drive system does not work
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drive belt came off from transaxle pulley, noticed in bad shape, ordered new one form parts select.
The drive belt literally goes from the back of the tractor to the front. The mower must be removed, helps to have the tractor up on blocks to give adequate room for work on underside. Belt goes easiest on the engine first, then thread to the rear, install on the rear, (driven pulley) then on the idlers. Check to assure that it functions properly before re-installing the mower. If you have the owners manual, there is a diagram, (check your orientation, it is not clear if it is a birdseye or under tractor view) which offered some help. When replacing belt, check the transaxle front mount, mine was broken which is why the belt came off in the first place. Repairing the mount was quite a job in itself, but now works fine.
Parts Used:
V-Belt-Drive
  • Lynn from BOILING SPGS, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
18 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Take the wheel off. Place the key in the slot. Put the wheel back on.
Just described it.
Parts Used:
Key
  • Gary from PILESGROVE, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front wheels, too much end play
Shimmed the wheels out on axle.. No more slop.
Parts Used:
Washer 25/32 x 1-1/4 x 16 Ga.
  • Frederick from BINGHAMTON, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
8 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!