This is an OEM replacement ice and water filter for your refrigerator. In side-by-side refrigerators, it is found in the top right corner or the bottom left grille. In bottom-freezer refrigerators, th...
Sold individually. This door bin is for refrigerators.
The door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This ice maker is for refrigerators.
Ice maker includes the ice mold and the control device. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until t...
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help s...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ic...
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
Ask our experts a question about this model and we'll get back to you as soon as possible!
18 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wes
February 3, 2023
Ice maker isn't refilling with water, but only works every other week. This last time it been over a week and it hasn't made any ice.
For model number WRS571CIHZ01
Hello Wes, thank you for your question. There are several reasons you may find your ice maker not working all of a sudden, including a blocked water dispenser, issues with your Water Supply Line PS11750829, or a clogged water filter. Or, if no water is getting released into the system, and the Water Inlet Valve PS11753250 can be responsible for that. We are pleased to have been able to help.
Ice maker lever is stuck in up position.
How do I reset the ice maker? I dont see a reset button.
For model number WRS571CIHZ01
Hi Steven, thank you for contacting us. You need to unplug the refrigerator for 5 minutes. This will allow the ice system to reset. After 5 minutes, replug the refrigerator and turn the switch back on. This should cause the ice maker to start working again. If this method does not work, then try to pull the lever down manually. If this does not help as well, then we would recommend replacing the ice maker, part number PS11738120. We hope this solves your problem!
Ice maker is making ice but not dispensing-seems to be freezing up at bottom of bucket
For model number WRS571CIHZ01
Hello Candis, thank you for contacting us. We would recommend checking the following parts to fix your issue: Auger Motor, part number PS12349163, Seal, part number PS11739241, Coupling, part number PS11739763, and Ice Maker, part number PS11738120. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
My icemaker was very slow so I removed the kick plate and cleaned the underneath coils which had accumulated a layer of cat hair. Now the ice maker is working but I cannot replace the kick plate. Is there a secret to putting back on the kick plate. It seems that both sides of the kick plate need to be twisted slightly at the same time when replacing it. Is this true?
For model number WRS571CIHZ01
Hello Lames, Thank you for the question. To install the grill you will need to open the door in about a 90 degree angle to get it to slide into place. Then you would just screw it into place. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Tony
September 22, 2022
I have a loud fan noise coming from the Air flow box. I only happens when I close the door. Box is located in the upper left corner of the frig.
Thank you.
Tony
For model number WRS571CIHZ01
Hello Tony, thank you for your question. We have researched your model and found that the issue is probably with the Evaporator Fan Blade, part number PS11738973. If that does not take care of the issue, then the problem is most likely to be related to the Fan Grommet, part number PS11739011. If you require assistance to place an order, please contact customer service. We hope that helps!
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the le
... Read moread wires and ordered a replacement socket kit from Partselect. When the new one arrived, I reconnected the lead wires to it, snapped it back into its hole, screwed in a new lightbulb, and presto!! The light was back on with no further problem. Thank you, Partselect!! A $15.00 part saved me what probably would have been at least a $100. service call and heaven knows what the technician would have told me I needed!!!
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.