The Dryer Thermal Fuse (Thermal Cutoff, Temperature Fuse) is a 2 by ½ inch, white, plastic safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats. If the fuse ...
$19.61
In Stock
Order within the next 5 hrs and your part ships today!
This dryer door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open, and operates the drum light. White in color and 6.5 inches long, this OEM swit...
$34.66
In Stock
Order within the next 5 hrs and your part ships today!
This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, ...
$5.04
In Stock
Order within the next 5 hrs and your part ships today!
When connected to electricity the dryer heating element glows red hot and generates heat. When air is blown over it, it heats the air which is used to dry the clothes. The heating element fits inside ...
$47.89
In Stock
Order within the next 5 hrs and your part ships today!
The filter collects lint during the drying cycle. This filter is 12 1/2 inches wide and 10 1/2 inches deep. Replacing the lint filter is an easy repair which requires no tools. When replacing the lint...
$61.41
In Stock
Order within the next 5 hrs and your part ships today!
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
$22.89
In Stock
Order within the next 5 hrs and your part ships today!
This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings,...
$53.54
In Stock
Order within the next 5 hrs and your part ships today!
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. This part is sold separ...
$22.67
In Stock
Order within the next 5 hrs and your part ships today!
The Drive Belt is a 93 1/2" belt which wraps around the dryer drum to allow tension and movement. If broken the dryer will not turn properly, or there may be loud noises. The part is rated as "medium"...
$21.93
In Stock
Order within the next 5 hrs and your part ships today!
The internal-bias thermistor (Thermistor, Dryer Thermister, Dryer Thermistor) prevents the dryer from overheating by monitoring and controlling the temperature of the inside of the dryer drum. It is l...
$27.89
In Stock
Order within the next 5 hrs and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$13.41
In Stock
Order within the next 5 hrs and your part ships today!
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
$11.37
In Stock
Order within the next 5 hrs and your part ships today!
Questions And Answers for WED5500XW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeff
January 21, 2020
How do i get to the heating element to change it
For model number WED5500XW0
Hello Jeff, thank you for your question. You access the heating element from the front on the bottom right side. There is an installation video showing how to complete this repair when you search the element part number which is PartSelect Number: PS11741416. Good luck with your repair.
Power comes on, however, the "on" button just "beeps" when depressed.
Thanks in advance
For model number WED5500XW0
Hello Bill, thank you for reaching out. If the keypad beeps when the button is pressed, we suggest that you check the control board as it could be the culprit. The part number for the electric control board is PS11751511. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
How do I get the top off of my dryer, model WED5500XW0?
For model number WED5500XW0
Hello Jeff, thank you for a very interesting question. To get the top off, follow the guide in the attached video link. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
March 20, 2024
Lights on the top come on, but the dryer will not run.
For model number WED5500XW0
Hi James, thank you for reaching out. We have found that the issue is with door switch, part number PS11741701. It prevents the dryer from running when the door is open. You may need to replace the switch to fix the issue. Glad to be of assistance!
My dryer squeals when I first start it. I use the dryer quite frequently so it does not sit idol. After the squeal stops it usually does not squeal again, except once in a while a very slight squeal. What could it be?
For model number WED5500XW0
Hello Larry, thank you for your inquiry. We have researched your model and would recommend checking the following parts to fix your issue: drive belt, part number PS11722115, pulley, part number PS334244, and drum roller, part number PS11752609. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils. Not knowing what the problem was I started looking at the coils and could not see any broken parts. So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of
... Read moreneedle nose pliers, it was held in place by two screws, once they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading. I replaced with a new one and put it all back together the way I took it apart. Then I plugged it in and it worked first time, I now have warm dry clothes.
Cleaning the lint out of the whole machine took quite a bit of time--it was everywhere. Underneath the lint trap was a collection that ultimately ruined the thermal fuse where it restricted the air flow considerably.
Ascertaining the problem was the most time consuming part.
The actual repair was quite simple and did
... Read moren't take but 15-20 minutes.