This water tubing clip, also known as a P-clamp, is usually used within refrigerators and freezers to organize the water line and tubing, but due to its versatility, this clip may also be used in othe...
$8.06
In Stock
Order within the next 12 hrs and your part ships today!
Order within the next 12 hrs and your part ships today!
Questions And Answers for QHE16HYPAFS
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tomas
July 5, 2023
Installation of the IM4d ice maker. The ice maker mounting holes don't match up. Cannot raise the ice maker high enough to meet the mounting screws. Also, how can I remove the water tube access cover on the back of the refrigerator to ensure that the connection is correct?
For model number QHE16HYPAFS
Hello Tomas, thank you for a very interesting question. To install the icemaker, follow these steps: Inside the freezer, remove the cover for the icemaker power supply socket. For easy installation, remove the top and middle left freezer drawer. Drive both mounting screws halfway into screw holes on the support bracket of the left-side upper wall in the freezer. Lift the icemaker so the fill tube assembly fits in the fill cup opening. Hang the icemaker on the screws and on the L-shaped tab in front of the supporting bracket. Make sure: The power cord is still firmly in the socket. The fill tube assembly extends into the fill cup opening at the back of the ice maker. The icemaker mounting screws should be located in the uppermost position of the mounting slots on the icemaker bracket. The icemaker is level. The icemaker power switch is in the OFF position. Securely tighten the ice maker with the mounting screws. Removing the access cover requires removing screws that attach the cover to the back of the refrigerator case. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.