MDB6601AWW Maytag Dishwasher - Overview
Sections of the MDB6601AWW
[Viewing 8 of 8]Manuals & Care Guides for MDB6601AWW
Click to downloadKeep searches simple, eg. "belt" or "pump".
Dishwasher Door Handle And Latch Assembly with Switch
PartSelect #: PS11748729
Manufacturer #: WPW10130695
This door latch (Dishwasher Door Latch Assembly, Door Latch Assembly, Latch Assembly) is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. It is located on ...
$30.89
In Stock
Silverware Basket - Gray
PartSelect #: PS11743069
Manufacturer #: WP6-918873
This silverware basket is gray in color and measures 8 inches wide by 11-1/2 inches high by 12 inches deep. The silverware basket is used to hold small utensils such as forks, spoons, and knives durin...
$27.72
In Stock
Lower Wheel Assembly
PartSelect #: PS11747717
Manufacturer #: WP99002780
This lower dishrack roller is less than two inches in diameter. It is made entirely of white plastic. If you find that your dishwasher is making loud noises or the lower rack is getting stuck when you...
$12.45
In Stock
Door Latch with Switches - NO Handle
PartSelect #: PS11751688
Manufacturer #: WPW10275768
This door latch, used in dishwashers, is located at the top of the door and locks the door shut when the dishwasher is working. If the door will not close or is damaged, changing the latch could be th...
$56.22
In Stock
Fold Away Tine Pivot
PartSelect #: PS11747708
Manufacturer #: WP99002709
The fold away tine pivot or clip holds the tine rows in place. This part is made of gray plastic and is approximately 3 and a half inches in length. Some dishwasher models will have fold away tine row...
$10.97
In Stock
Rack Adjuster with Wheels- Right Side
PartSelect #: PS11749127
Manufacturer #: WPW10153532
This adjuster connects to the right hand side of the top dishrack. It is used to change the height of the upper rack.
$97.19
In Stock
Rack Adjuster with Wheels - Left Side
PartSelect #: PS11749126
Manufacturer #: WPW10153530
This adjuster connects to the left side of the top dishrack. It is used to change the height of the upper rack.
$101.67
In Stock
Inner Door Foam Insulation Strip
PartSelect #: PS11748543
Manufacturer #: WPW10117748
This genuine inner door foam insulation strip, sometimes known as bottom seal foam, is used to create a waterproof seal that helps prevent leaking from the door area of the dishwasher. The existing in...
$36.18
In Stock
Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.77
In Stock
Convertible Tine Pivot
PartSelect #: PS11747705
Manufacturer #: WP99002687
This is the replacement convertible tine pivot for your dishwasher. It is made of gray plastic and is approximately 4 inches long and 1 inch wide. The convertible tine pivot allows the tine row to eit...
$10.89
In Stock
Tub Wheel - NOT a Rack Wheel
PartSelect #: PS11747734
Manufacturer #: WP99002947
This wheel attaches to the inside of the tub to help guide the track and support the top rack.
$16.13
In Stock
Accumulator Filter
PartSelect #: PS11749941
Manufacturer #: WPW10192799
This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.
$136.29
In Stock
Questions And Answers for MDB6601AWW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karen
December 4, 2019
The heating element stays on. I've used the breaker to turn off the dishwasher and when i turned the break back on the heating element turns on immediately. What could be causing this and how do i fix it?
For model number MDB6601AWW
Hello Karen and thanks for writing.
It sounds like a faulty heating element PS2367647 check and replace if needed. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the MDB6601AWW
[Viewing 11 of 11]Door latch failure
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken latch handle
The hardest thing was figuring out that you only need to purchase the latch handle because it only comes as a complete latch assembly, why they even list the latch assembly as a separate part in the parts list stupid. (you get the handle and latch already put together and it cost less than the latch assembly without the handle). Anyway al
... Read more
l you need to do is disconect the power from the dishwasher (unless you like to live dangerously like me) take your drill with the correct size torx bit and remove all the screws on the inside door pannel (the top center two screws actually hold the latch assembly in place). Disconect the 4 wires from the old part and reconect them to the new part and reinstall all the torx screws being careful not to strip the plastic threads that they screw into if you are using a drill. Whole process takes less than 5 minutes. I am surprised that Maytag used such a flimsy handle assembly in their dishwashers since they are supposed to have the repair men with the most time on their hands. They probably sell just as many handle assemblies as they do dishwashers that have this particular part in it, probably more since you will probably have to change it 2 or 3 times during the life of the unit.
Read less
Parts Used:
-
Walter from Tucson, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1081 of 1117 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle jammed and door wouldn't open on Maytag Quietseries 100 dishwasher
I Followed others' instructions already posted to replace the whole handle assembly. In particular, use a big screwdriver placed against the bottom of the handle and whack the grip with the palm of your hand to get the handle to move back to the open position so you can open the door and start the job. I am no handyman, but this fix was
... Read more
easy, about 30 minutes in all, most of which was spent figuring out which breaker to pull so as not to get shocked. One note of caution: use the correct screwdriver attachment (not a Phillips head or regular, but a star or something- see I am not a handyman but I do have a $15 screwdriver set that just paid for itself 10 times over!).
Read less
Parts Used:
-
Philip from Carlsbad, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
571 of 589 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door release latch handle was broken. The handle was deeply recessed into the door and the door was difficult to open.
Remove the 8 or 9 torx screws holding the inner and outer door assembly together (leave the bottom screws in), lift the old handle assembly out, transfer the switches to the new handle assembly, and reassemble door.
Parts Used:
-
Dave from Livonia, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
547 of 554 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!