This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is made of rubber. The belt transfers the ro...
$17.17
In Stock
Order within the next 7 hrs and your part ships today!
This door catch kit is designed for use in dryers. This is an authentic OEM replacement part. This catch assembly ensures the door of your appliance will close, and remain closed. It allows your appli...
$32.31
In Stock
Order within the next 7 hrs and your part ships today!
This blower wheel clamp, used in a clothes dryer, is a clamp that holds the blower wheel to the motor shaft. This part helps hold the blower wheel in place to function easily and properly. If your clo...
$13.60
In Stock
Order within the next 7 hrs and your part ships today!
The drum felt seal, used in dryers, allows the drum to smoothly glide with minimal friction. If any of the following symptoms occur with your dryer, replacing the felt seal can be a solution to your p...
$39.84
In Stock
Order within the next 7 hrs and your part ships today!
This is the replacement motor pulley for your dryer. The motor pulley transfers momentum from the drive motor to the drum via the drive belt. If the motor pulley cracks or is no longer staying on the ...
$66.45
In Stock
Order within the next 7 hrs and your part ships today!
Questions And Answers for MCE8000AYW
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sharon
January 7, 2020
I had to replace back tub rollers now can't get the tub back in. I've had it apart before but can't get it done this time.
For model number MCE8000AYW
Hello Sharon, Thank you for the question. Here is a link to a how to video that may help. Good luck with the repair!
https://www.youtube.com/watch?v=7q9AO_nCkuY&feature=emb_title
5 people found this helpful.
Was this helpful?
Thank you for voting!
Debbie
November 25, 2019
How do you dismantle lower dryer section to replace the belt?
For model number MCE8000AYW
Hello Debbie, thank you for inquiring. We have a repair video to assist you with this: https://www.youtube.com/watch?v=LxooXQCin8Y&. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Steven
March 7, 2020
Found the part you recommended, part no. 53-0148. Installed it in the dryer but when i press the button it still shows “close door” on display. Any suggestions what i should do now. It was a part that i got from ebay in a package listed as genuine factory parts
For model number MCE8000AYW
Hi Steven, thank you for your question. If your door is not registering that it is locked and the part that you got is in working order, then you may have to go on to check your wiring and the control board for your appliance as well. It could be that the issue is in those areas. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Steven
February 24, 2020
With display on front lit up, when you open the doors the interior lights do not work. If i press start for the top unit, it runs. If i press start for the drum dryer, it displays “close door”. Which part or parts do you think i need to order from you to fix this issue?
For model number MCE8000AYW
Hello, Thank you for your question. You will want to look into the Door latch- Manufacturer Part Number 31001565. Unfortunately this part is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
December 12, 2019
How do I remove the top dryer from the bottom dryer
For model number MCE8000AYW
Hi David, sadly we could not find any information on how to do this, I would contact the manufacturer directly at 800-344-1274. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
1. Removed the screws from the lint catcher 2. Removed the bolts from upper rear of dryer 3. Pried off the dryer top from the front (it rests on rear hinges) 4. Disconnected dryer door wiring 5. Removed bolt from inside upper front corners; removed front panel (be careful: the edges are sharp and the tumbler will fall
... Read morewhen it loses support) 6. Removed broken belt and lint from interior parts; removed tensioner (which had fallen out of place). Note: The newer models have a tensioner pulley; my older model had a smooth semicircle that was confusing at first glance 7. Flipped dryer onto its back (for easier reinsertion of new belt and tumbler) 8. Placed new belt on tumbler; reinserted tumbler 9. Inserted new belt through tensioner, inserted tensioner "legs" into grooves on floor. Note: The belt will pull the tensioner upright when it's inserted properly (which isn't obvious at first) 10. Made sure belt and tumbler seal were properly installed 11. Replaced parts in reverse order The process took over an hour because I couldn't figure out how to insert the belt through the tensioner. The trick is to insert the folded belt through the tensioner and onto the motor pulley. If I had to do it again, it would take about 30 minutes (including cleaning lint)
The door had always opened with the wrong swing and it wasn't til I needed to repair this that I noticed you could change the swing. I changed the swing of the door and then noticed that the clip was included on both sides so i did not need to repair the catch. I still have the part so when it breaks again, I can just pop it in.
Started out taking the back off, then found online that access is from the front and much easier to get to. Simply pop the hinges in the back of the top panel and then the front of the top is popped off. From there, it is easy to remove the old belt, clean the innards (found 31 cents) and replace the new belt. It was a little disconcer
... Read moreting to see the idler pulley laying loose inside, but the diagram showed exactly how to put it back in place, with the new belt keeping it in place.