This EveryDrop Filter5 is certified to reduce the most contaminants with Triple Filtration Technology. Now, you and your family can enjoy the enriching benefits of cleaner, freshly filtered ice & wate...
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack ...
This ice maker (Complete Icemaker Assembly, Whirlpool Icemaker Kit, Ice Maker Assembly, Refrigerator Ice Maker, Icemaker) receives water from the water inlet valve, freezes it, and dispenses it into t...
The Door Cam is a black plastic part which helps the door pivot shut while keeping the door and hinge in proper alignment. Lubricating this part upon installation may help it move easier. It attaches...
The “Icemaker Control Assembly” (Module & Motor Assembly, Ice Maker Control Module, Icemaker Module, Refrigerator Ice Maker Module) is what controls the actions of your ice maker. The control turns th...
This is a control bracket for your refrigerator, and may also be known as the dispenser control bracket. The function of this part is to hold the micro switches and the light socket in the freezer dis...
This is a refrigerator ice guide that is made entirely of clear plastic. This ice guide is located in the freezer door. Turn your refrigerator ice dispenser off before replacing the part. This is a si...
If you have ice building up in your freezer, or if your freezer is getting too warm during the defrost cycle you may need to replace the bi-metal defrost thermostat. The function of the defrost bi-met...
In this kit you will find the support, the ice door, spring, and delay. The heater ribbon is no longer needed and therefore will not be included with this part. This kit works in the dispenser chute t...
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
$16.30
In Stock
Questions And Answers for KSCS25FKSS02
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Penny
February 2, 2020
What is the cubic foot capacity of this model?
For model number KSCS25FKSS02
Hello Penny,
Thank you for your question. The cubic foot capacity for your model is 24.5 cu ft. We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
February 22, 2020
Water dispenser drips and leaks water continuously when not in use. It is still doing this after the water filter has been replaced. Please advise on the proper repair.
For model number KSCS25FKSS02
Hello Jim,
Thank you for your question We have done an investigation into your model KSCS25FKSS02, we have discovered that the Water Tube Kit would be the most accurate cause of your symptoms. It is available under part number PS11730901. If there is a break in the water tube or it is obstructed in some way, it would cause a leak from your dispenser. We hope this helps you.
I'm looking for a replacement drawer for the Meat Locker. This refrigerator is 2004 model.
For model number KSCS25FKSS02
Hello Susan, thank you for getting in touch. The part you are looking for is part number PS11739020. If you need help placing an order, customer service is open 7 days a week!
Do I need a blank filter or a plug if I don’t want to use the water filter? Thank you for your help.
For model number KSCS25FKSS02
Hello Bethany, thank you for getting in touch. According to our research, your model does not come with any blank filter or bypass plug. You can run the dispenser without a water filter, but your water will not be filtered. You may need to remove the water filter and then slide the water filter cap from its end. After removing the filter, insert the water filter cap into the base grille until it stops. We hope this helps.
Was this helpful?
Thank you for voting!
Lesley
January 7, 2020
I need to replace the glass butter dish in the door of the refridgerator
For model number KSCS25FKSS02
Hello Lesley, Thank you for the question. I looked up the Manufacturer Part Number WP2165792K and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. We hope this helps!
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the
... Read morepower connection and mount new Ice Maker on the two top screws and install the bottem screw. It took e while for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received the next. THANKS!!!!
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Tha
... Read morenks