This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it...
$103.87
In Stock
Order within the next 8 hrs and your part ships today!
This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
$26.89
In Stock
Order within the next 8 hrs and your part ships today!
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
$21.89
In Stock
Order within the next 8 hrs and your part ships today!
This pantry drawer lid is also known as a pantry drawer door or pantry drawer cover. This is a genuine OEM part, and is sold individually. This part helps keep everything inside the drawer. It acts as...
$115.92
In Stock
Order within the next 8 hrs and your part ships today!
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
$27.62
In Stock
Order within the next 8 hrs and your part ships today!
This is an ice maker assembly for various models of refrigerator. This ice maker assembly is used to freeze and eject ice into the ice bucket, then dispense the ice. This ice maker comes with the nece...
$93.63
In Stock
Order within the next 8 hrs and your part ships today!
The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed...
$39.39
In Stock
Order within the next 8 hrs and your part ships today!
This door bin is for refrigerators.
The door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
Follow the instructions in the owner's manual for installin...
$48.68
In Stock
Order within the next 8 hrs and your part ships today!
This water filter bypass cap, also known as a water filter bypass plug, is an authentic OEM part that replaces the regular water filter cartridge in refrigerators. It allows water to flow freely throu...
$33.03
In Stock
Order within the next 8 hrs and your part ships today!
Questions And Answers for KRFF305ESS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
March 17, 2020
The freezer door handle is loose. How do i tighten it back up?
For model number KRFF305ESS00
Hello Bill, thank you for your question. There should be a small set screw on the underside of the handle that you can tighten to secure that side of the handle. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jean
January 27, 2022
What position does the arm need to be in for the ice maker to be on?Up or down?
i'm not sure if it's broken
For model number KRFF305ESS00
Hi Jean,
Thank you for your question. If the arm on your ice maker is in the up position, it means that the ice bin is full and the ice maker is off. When the arm is in the down position, it is on. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeff
May 11, 2024
Can I get a replacement door gasket for the right hand upper door, and is steadily replaced?
For model number KRFF305ESS00
Hello Jeff, thank you for contacting us. The right side door gasket you are looking for is part number PS11759515. If the gasket is cracked, split, or warped, you will probably need to replace it. If you need help placing an order, customer service is open 7 days a week!
Freezer light is out. Where is the location and how do I replace the bulb?
Thank you,
For model number KRFF305ESS00
Hello Jerry, thank you for reaching out. The light bulbs are located inside the grille at the top, where the controls are located. To replace the bulb, use the following instructions:
1. Unplug the refrigerator or disconnect the power.
2. Remove the light shield. To disconnect the light shield from the light assembly, slide it toward the back of the compartment.
3. Replace the burned-out bulb with a bulb of the same size, shape, and wattage.
4. Replace the light shield.
5. Plug in the refrigerator or reconnect the power.
We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Alexander
February 9, 2020
Items in the fridge are freezing and the temperature shown for the freezer keeps going way up or down and i have not made any changes to it.
For model number KRFF305ESS00
Hello Alexander,
Thank you for your question. Our sources suggest replacing the thermistor under part PS2580944 for your model to fix the temperature issues. We hope this helps.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.
Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the
... Read morerepair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
Remove food off of lower shelf, remove the two produce drawers, remove large lower drawer, remove glass shelf, remove three screws holding end cap in place. Once end cap was removed the drawer track could be removed and placed on new end cap. Installation of new end cap took less than 5 minutes. Most of the time spent was removing/repl
... Read moreacing food and cleaning the shelf/bins. PartSelect was awesome BTW!