JB850ST1SS General Electric Range - Overview

Sections of the JB850ST1SS

[Viewing 7 of 7]

Manuals & Care Guides for JB850ST1SS

Click to download
Keep searches simple, eg. "belt" or "pump".
Temperature Sensor – Part Number: WB21X22134
Temperature Sensor
★★★★★
★★★★★
(48)
PartSelect #: PS10059162
Manufacturer #: WB21X22134
The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature ...
$26.89
  In Stock
Light Bulb - 40W – Part Number: 40A15
Light Bulb - 40W
★★★★★
★★★★★
(8)
PartSelect #: PS217532
Manufacturer #: 40A15
This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible wi...
$11.01
  In Stock
Oven Sensor – Part Number: WB23T10015
Oven Sensor
★★★★★
★★★★★
(18)
PartSelect #: PS236398
Manufacturer #: WB23T10015
The function of the oven sensor is to detect the temperature within the oven cavity. If you notice that the oven is too hot or too cold, or it is not heating evenly, you may need to replace the oven s...
$36.65
  In Stock
Dual Radiant Element - 9 Inch – Part Number: WB30T10133
Dual Radiant Element - 9 Inch
★★★★★
★★★★★
(29)
PartSelect #: PS2321567
Manufacturer #: WB30T10133
The dual radiant element for your range or cooktop provides the heat that you cook with. It is found under the main cooktop. If your element will not heat, you will need to replace it with this part. ...
$102.89
  In Stock
Infinite Knob - Stainless Steel – Part Number: WB03T10284
Infinite Knob - Stainless Steel
★★★★★
★★★★★
(12)
PartSelect #: PS2321076
Manufacturer #: WB03T10284
This plastic knob is sold individually. This knob accepts a double-flat shaft.
$45.66
  In Stock
Oven Bulb Lens Cover - Glass – Part Number: WB25T10002
Oven Bulb Lens Cover - Glass
★★★★★
★★★★★
(8)
PartSelect #: PS237483
Manufacturer #: WB25T10002
This part is the replacement oven bulb lens cover. It is made of glass and is approximately 3 inches in diameter. The lens cover is rigid and protects the oven light bulb from being damaged. The main ...
$11.50
  In Stock
Oven Light Housing – Part Number: WB08T10002
Oven Light Housing
★★★★★
★★★★★
(12)
PartSelect #: PS230438
Manufacturer #: WB08T10002
The light housing is also known as a lamp holder and is a part for the oven in your range. The function of this piece is to hold the bulb that will light up the inside of your oven. As per the manufac...
$28.91
  In Stock
Foot - Leveller – Part Number: WB02X10521
Foot - Leveller
PartSelect #: PS223802
Manufacturer #: WB02X10521
Sold individually.
$23.43
  In Stock
Screw – Part Number: WH2X930
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS271689
Manufacturer #: WH2X930
This screw is sold individually.
$12.21
  In Stock
Lens – Part Number: WB25T10041
Lens
★★★★★
★★★★★
(4)
PartSelect #: PS1020380
Manufacturer #: WB25T10041
This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user that the element is, in...
$12.49
  In Stock
Triple Haliant Element - 12 Inch – Part Number: WB30T10126
Triple Haliant Element - 12 Inch
★★★★★
★★★★★
(18)
PartSelect #: PS2321560
Manufacturer #: WB30T10126
This is a replacement haliant element for your cooktop or range. It is used with flat top ranges, and is found under the glass top of the range. This element is approximately 12 inches in diameter and...
$221.08
  In Stock
Window Pack Assembly – Part Number: WB56T10105
Window Pack Assembly
★★★★★
★★★★★
(14)
PartSelect #: PS773379
Manufacturer #: WB56T10105
$176.20
  In Stock

Questions And Answers for JB850ST1SS

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the JB850ST1SS

[Viewing 6 of 6]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven would go in to a F2 Error
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
Parts Used:
Temperature Sensor
  • Peter from stamford, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
146 of 216 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven was not coming up to temperature
I had to remove the oven from the wall because the sensor plug connction is behind the unit. Two screws hold the sensor inside the oven and then I disconnected the lead and pulled the sensor out from the front. I installed the new sensor, tightened the two screws holding it in and connected the lead. Then reinstalled the oven into the wall. Overall, a very easy repair once you get the oven out.
Parts Used:
Oven Sensor
  • Sean from Highlands Ranch, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
55 of 70 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
terminal block melted
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Parts Used:
Terminal Block Kit
  • jonathan from willow springs, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
54 of 70 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!