GTWN4250D1WS General Electric Washer - Overview

Sections of the GTWN4250D1WS

[Viewing 4 of 4]

Manuals & Care Guides for GTWN4250D1WS

Click to download
Keep searches simple, eg. "belt" or "pump".
Tub Dampening Strap – Part Number: WH1X2727
Tub Dampening Strap
★★★★★
★★★★★
(36)
PartSelect #: PS271100
Manufacturer #: WH1X2727
The tub dampening straps support the wash tub and reduce vibration by keeping the tub at the center of the cabinet. If your washer shakes and moves, or is making a loud banging noise during the wash c...
$9.60
  In Stock
Drain Hose – Part Number: WH41X10096
Drain Hose
★★★★★
★★★★★
(57)
PartSelect #: PS890597
Manufacturer #: WH41X10096
The drain hose is black in color and made of flexible material. This is a part for your top-load washer. The hose measures 57 inches long. This part moves the water out of the washer and into the drai...
$27.06
  In Stock
Dual Action Agitator – Part Number: WH43X10034
Dual Action Agitator
★★★★★
★★★★★
(106)
PartSelect #: PS1482519
Manufacturer #: WH43X10034
This is a dual-action agitator for a washer. It is an OEM replacement part that is sourced from the manufacturer. The agitator tosses your clothes to clean them efficiently. This plastic dual-action a...
$75.24
  In Stock
Tub Seal – Part Number: WH02X10383
Tub Seal
★★★★★
★★★★★
(16)
PartSelect #: PS4704237
Manufacturer #: WH02X10383
The main tub seal is located between the transmission and the outer tub. Its the primary water seal in the outer tub for the transmission-shaft. If your washer is leaking during the fill cycle, or at ...
$16.71
  In Stock
6-Rib Drive Belt – Part Number: WH01X10302
6-Rib Drive Belt
★★★★★
★★★★★
(19)
PartSelect #: PS1482278
Manufacturer #: WH01X10302
This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.
$25.73
  In Stock
Tub Bearing Washer – Part Number: WH2X1197
Tub Bearing Washer
PartSelect #: PS271509
Manufacturer #: WH2X1197
This is a tub bearing and it is meant to work in conjunction with your washing machine. The purpose of this part is to aid in keeping the inner tub of your washing machine spinning smoothly during a w...
$9.96
  In Stock
Split Ring – Part Number: WH02X10265
Split Ring
★★★★★
★★★★★
(8)
PartSelect #: PS1766022
Manufacturer #: WH02X10265
This split ring is supplied by the original equipment manufacturer, and it is designed to secure the tub bearing in washing machines. It is a circular metal ring, with an outer diameter of 2 inches. T...
$14.40
  In Stock
Tub Bearing – Part Number: WH2X1198
Tub Bearing
★★★★★
★★★★★
(2)
PartSelect #: PS271510
Manufacturer #: WH2X1198
This tub bearing goes in your washing machine. You will find it on the bottom of the outer tub, where the transmission goes through the tub. If you hear metal on metal when the washer is spinning, you...
$27.50
  In Stock
Agitator Coupling – Part Number: WH43X10032
Agitator Coupling
★★★★★
★★★★★
(21)
PartSelect #: PS1482517
Manufacturer #: WH43X10032
Bolt not included. This part connects the transmission drive shaft to the agitator base.
$25.61
  In Stock
Lid Switch with Wire Harness – Part Number: WH12X10334
Lid Switch with Wire Harness
★★★★★
★★★★★
(18)
PartSelect #: PS1482372
Manufacturer #: WH12X10334
This lid switch with wire harnesses is used in washing machines. The pin on the lid switch pushes onto the lever of the switch to communicate to the machine that the washer lid is closed. If your wash...
$46.61
  In Stock
Pump to Tub Inlet Drain Hose – Part Number: WH41X22935
Pump to Tub Inlet Drain Hose
★★★★★
★★★★★
(8)
PartSelect #: PS11721808
Manufacturer #: WH41X22935
This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide.
$16.93
  In Stock
Water Pressure Switch Hose – Part Number: WH41X365
Water Pressure Switch Hose
★★★★★
★★★★★
(11)
PartSelect #: PS272183
Manufacturer #: WH41X365
This is a water pressure switch hose, also known as the air dome tube, for your washer. It is made of clear plastic and is sold individually. The hose transports water to your water pressure switch, s...
$13.06
  In Stock

Questions And Answers for GTWN4250D1WS

Ask our experts a question about this model and we'll get back to you as soon as possible!

26 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
January 13, 2020
Occasionally water will drip into the washtub after the cycle is complete and the clothes have been removed.
For model number GTWN4250D1WS
PartSelect logo
Hi Chris, thank you for your question. If you are getting a little bit of a leaking into your tub, you may need to take a look at your water inlet valve for being the issue. It could be that it is not shutting completely to stop the water from coming through. Good luck with your repair.

18 people found this helpful.

Was this helpful?
Thank you for voting!
Jennifer Bissell
February 4, 2020
Randomly my washer will not drain and spin. I could do several loads of laundry and they all work fine, then it will randomly not drain and spin. I then turn the knob to drain and spin, sometimes it works, sometimes it doesn’t. Any suggestions of what could be going on?
For model number GTWN4250D1WS
PartSelect logo
Hello Jennifer, thank you for your question. That sounds like an issue with the timer, or the lid switch. I would recommend testing/replacing those two parts. I hope this helps.

11 people found this helpful.

Was this helpful?
Thank you for voting!
Raymod
November 27, 2019
Some times it wont turn on , some time it fills up with water and then drains, some times it goes thru a rinse cycle longer then it need to Thanks raymond
For model number GTWN4250D1WS
PartSelect logo
Hello Raymond, thank you for your question. That sounds like an issue with the electronic timer unit. We would recommend replacing PartSelect Number PS8757105. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Beth
March 9, 2023
water continues to drip into the tub after spin cycle
For model number GTWN4250D1WS
PartSelect logo
Hello Beth, thank you for contacting us. According to our research, this issue indicates that the water inlet valve, part number PS3652834, is probably faulty. It could be that it is not shutting completely to stop the water from coming through. We hope this information helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Tom
December 18, 2019
Spin cycle does not remove enough water, still wringing wet What to do
For model number GTWN4250D1WS
PartSelect logo
Hello Tom and thanks for writing. It certainly sounds like a faulty or loose belt PS1482278 check for signs of damage and replace it if needed. We hope this helps. Please contact us anytime.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
  • 3

Common Symptoms of the GTWN4250D1WS

[Viewing 14 of 14]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing
Show All
Shaking and Moving
Fixed by
these parts
Fixing
Show All
Burning smell
Fixed by
these parts
Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
Spinning Issues
Fixed by
these parts
Fixing
Show All
Water Filling Issues
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
washing machine would not go through all cycles or agitate
After removing frt panel which prys off I checked for anything obvious like a loose belt. Then I jiggled the magnet switch located on the inside of the loading cover. I saw the machine start agitating the it stopped again when I stopped touching it. I ordered the new part and spliced it in with the wire crip tool. Now the machine is A ok.
Parts Used:
Lid Switch with Wire Harness
  • Brian from Millerplace, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
227 of 287 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken drive belt
To diagnose, first I unhooked the washer: power, water supply, and drain pipe. I then slid the washer out, laying it on its front. With nutdriver, I unscrewed two screws that held the other end of the drain tube and removed it completely. Then, again with the nutdriver removed 4 screws from the back near the legs, two in between the legs in the middle, and approx. 4 to 6 on the bottom. This let me pull the bottom off partially to access the motor area. (I did did not take the bottom completely off, only about 2/3 off and let it bend over, as it was flexible tin) The belt was broken. After receiving the new belt, I positioned it between the pulley and the motor and between the drum and the big pulley. Then I rotated the big pulley, pulling the belt onto it as I rotated. At the same time, as I rotated, I pulled the other end of the belt on to the little pulley. Once it was on, I would put pressure on it as I turned the pulley, to jump the belt to the appropriate grooves on the little pulley. Note: the replacement belt had been modified, so it had one less groove than the pulley. I would have known this if I had read the insert that came with the belt first! Anyway, this was not a problem, only a design change. Also it was important to start the belt on the inside, so if it slipped, you didnt loose your bite. Total diagnostic, repair, and reassembly time: 30 minutes plus or minus. I had read other online forums that said you had to loosen the motor, etc. And I do know some type of a belt installation tool was offered on line, but I got along fine with my installation method. An extra set of hands would have been helpful, but not necessary.
Parts Used:
6-Rib Drive Belt
  • jon from barry, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
92 of 111 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blades broken off agitator
Simply put hands, one under each side of the agitaror and pulled up. The part snapped off very easily. I then placed the new part in the tub and pressed down. Extremely easy, should have done it sooner!
Parts Used:
Dual Action Agitator
  • Michael from Itasca, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
70 of 83 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!