This OEM ice and water filter fits side-by-side and bottom-freezer GE models. The most common reason you would need to change this part is if you have never updated your model and it is no longer filt...
The French door divider spring fits most Samsung French door style refrigerators. The spring applies tension between components in the refrigerator, which engages and retracts the door flap. This will...
This is a replacement spring pin for French door-style refrigerators. This part is made of white plastic and is approximately ½ an inch in length. If the mullion that keeps the doors closed is not wor...
This part is the replacement French door hinge for your refrigerator. It is made of white plastic and is approximately 1 ¼ inch by 1 inch. The French door hinge can also be known as the flipper hinge....
This part holds the ice once it's released from the icemaker. When activated, the auger rotates and pushes ice out of the bin through the chute to the user
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
Assembly CASE-ICE ROUTE
This dispenser ice chute door and funnel assembly is for refrigerators.
Dispenser ice chute door and funnel assembly opens to let ice through when dispensing into a glass ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
11 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ronda
March 25, 2020
Water keeps building up and freezing beneath the deli drawer.
For model number GFSS6KKYCSS
Hello, Thank you for your question. You will want to check the hosing and drain pan in the bottom back of the unit. That typically is where the water comes from. We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Henry
February 23, 2023
What causes the defrost drain to freeze which then causes defrost water to spill into the bottom of the refrigerator?
For model number GFSS6KKYCSS
Hi Henry, thank you for reaching out. The defrost drain freezes due to water dripping off of evaporator coils and begins to freeze again before making its way through the defrost drain. The ice buildup then blocks the drain hole. Due to this, the water will overflow the drain trough and drip down to the bottom of the compartment. To fix the issue, we suggest cleaning the drain hole and checking that the defroster heater clip, part number PS2340404, is properly installed. We hope this solves your problem!
Water line will freeze in the refrigerator but not in the door how can i fix the problem.
For model number GFSS6KKYCSS
Hello Tyrone,
Thank you for your question. Our sources suggest replacing the water inlet valve under part PS2374812 for your model to fix the water lines issues. Its possible that the water isn't flowing fast enough to reach the dispenser from the water valve and it is freezing midway because of it, thus the valve would be defective. We hope this helps.
Hello Mike, thank you for your question. We would recommend inspecting the rollers, slides and frame to see where the issue is. If the drawer will not open, there could be something broken or out of place which would prevent this from opening and closing properly. I hope this helps.
Was this helpful?
Thank you for voting!
Andre
February 14, 2023
where does the top light gets its power from ?
For model number GFSS6KKYCSS
Hello Andre, thank you for reaching out. Based on our research, the upper light in the freezer gets power from the control board which is controlled by the door switch states. When the door is open, the control board sends a voltage signal and the light turns on. While, when the door is closed, the light gets off from the control board. Please submit a new question if you have any follow-ups!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video t
... Read morehe installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.
Until I figured out that the Metal cover on the divider door had to be removed (pried out) giving access to the hidden hinges. After that the hinges could be removed and replaced.Great with giving phone thou.
I just replaced the broken spring and the little plastic cylinder that goes over the end of one part of the spring. I placed the plastic part on first and slid it in place, then had to bed the other end of the spring a little bit to place it in the hole. But once it went in, the door worked perfectly. And I'm a 70 yr old woman. So if I c
... Read morean do it, anyone can.