The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
$7.70
In Stock
Order within the next 6 hrs and your part ships today!
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
$66.09
In Stock
Order within the next 6 hrs and your part ships today!
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking,...
$10.03
In Stock
Order within the next 6 hrs and your part ships today!
This one-piece door gasket provides a water tight seal between the tub and the door, to keep water from leaking out of your dishwasher. If your dishwasher is leaking, tears, or there are gaps in your ...
$62.19
In Stock
Order within the next 6 hrs and your part ships today!
The rinse aid cap (sometimes referred to as the dispenser cap), covers the rinse aid dispenser on the dishwasher door. If your dishwasher will not dispense detergent, or it is leaking detergent, there...
$27.56
In Stock
Order within the next 6 hrs and your part ships today!
This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance. Als...
$34.51
In Stock
Order within the next 6 hrs and your part ships today!
This is a basket for washing flatware or silverware in your dishwasher. This part has been updated and may differ in appearance but will function the same as the original.
$31.89
In Stock
Order within the next 6 hrs and your part ships today!
This is a chopper assembly or drain food chopper, and it is designed for your dishwasher. The chopper chops up/minces the food particles in your dishwasher to prevent them from clogging the pump. You ...
$34.74
In Stock
Order within the next 6 hrs and your part ships today!
This drain pump is used in dishwashers to remove water from the dishwasher tub. If the impeller in the dishwasher is damaged or the motor has been shorted out and will not drain, it is possible the bo...
$72.39
In Stock
Order within the next 6 hrs and your part ships today!
The rubber washer is a part which is specific to dishwashers and should not be substituted by a similar part. It works with the heating element to seal the receptacle opening where the heating element...
$7.75
In Stock
Order within the next 6 hrs and your part ships today!
Questions And Answers for 66513742K601
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
February 24, 2020
Hello, our glasses are not cleaned properly. It appears that the arm on the top rack is not spinning. (we placed it in a certain position, ran the machine for a few minutes and noticed that it did not move) please let me know what could be a cause for this problem. Nb. The top flap on the docking station (where it connects) is missing but the bottom one is intact.Thank you bill
For model number 66513742K601
Hello and thank you for writing.
Yes, you are correct if this part is not spinning it would cause dirty dishes, especially dirty glasses It is called a spinner kit # PS972316. For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair.
https://www.youtube.com/watch?v=z0rPfElzIPA&feature=emb_title
There is water in the bottom of the tub after a cycle has run. What is causing the washer not to drain.
For model number 66513742K601
Hello Myrna, thank you for your question. If your dishwasher is not draining, there are a few parts that you will need to check out. They are the Drain Pump PS11753379, the Drain Hose PS2358130, the Turbidity Sensor PS11757214, and clean out the filter. We have installation videos for all parts for you watch. We look forward to hearing from you soon.
Do you sell top and bottom racks for the dishwasher ... with or without the hardware / attachements ... finish on the racks is ruined in many places ... not fixable... many of the plate / dish-holders broken. can you provide a price including shipping to kemptville ontario.?
For model number 66513742K601
Hello and thank you for writing.
Yes, we do.
Lower dishrack assembly # PS11703300.
Upper dishrack # PS11755112.
If you would like to place an order with our company or inquire about pricing, availability, and shipping, you will have to contact our customer service. You can do so one of two ways: online: www.PartSelect.ca 800-901-6912. We hope this helps. Please contact us anytime if you require further assistance.
Can I purchase a replacement door panel in stainless for this model?
For model number 66513742K601
Hello Christine, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3418317. We hope this helps.
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release
... Read more the old pump.
First remove the water from the dishwasher pan that would not drain with a wet/dry vac. Otherwise the water will all drain on the floor when you remove the pump. Then remove the two screws on the kickplate on the front of the unit below the door. Remove the kickplate/maintainence access cover. The drain pump is on the right about 8 inches in. Using two hands you grasp the drain pump with your right hand and use the left hand to push the retaining clip down. Then the drain pump will rotate 1/4 turn counterclockwise and can be removed without pulling the dishwasher out. There is likely to be some water leak out that was traped in the pump housing that you can not reach with the vac. Disconnect the wire. Connect the wire to the new pump, put it in place and 1/4 turn clockwise to install it. Replace the kickplate and you're done.
Rather than remove the pump assembly - as an earlier post had done - I pulled the entire dishwasher out and laid it down on the floor. This allowed easy, direct access to the motor (that was the hard, messy part). From this point it was easy. Unplug the wiring, remove the retaining bolt, rotate the motor off the mounting brackets and pull
... Read more it out. Then put the new one in. That was the easy part (about 15 minutes). The entire job took 2-and-a-half hours, most of which was taken in disconnecting, cleaning up and reconnecting the dishwasher. It's much quieter now.