01815 Briggs and Stratton Generator - Overview

Sections of the 01815

[Viewing 5 of 5]

Exact Part matches for your search term

[Viewing 1 of 1]
Rotor Nut – Part Number: 01815
Rotor Nut
This part number matches the current model number 01815
PartSelect #: PS10336668
Manufacturer #: 01815
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Filter-Oil – Part Number: 492932S
Filter-Oil
PartSelect #: PS8982169
Manufacturer #: 492932S
$13.07
  In Stock
Order within the next 4 hrs and your part ships today!
Solenoid-Starter – Part Number: 691656
Solenoid-Starter
★★★★★
★★★★★
(3)
PartSelect #: PS9064363
Manufacturer #: 691656
A starter solenoid, also known as a starter relay, is an electrical component that is used within small engine systems to control the starter motor by engaging it when an ignition key is turned - acti...
$35.02
  Special Order
Key, Lock – Part Number: B5053GS
Key, Lock
★★★★★
★★★★★
(2)
PartSelect #: PS9184142
Manufacturer #: B5053GS
$7.52
  In Stock
Order within the next 4 hrs and your part ships today!
Switch, Oil Temp – Part Number: 186205GS
Switch, Oil Temp
PartSelect #: PS9268625
Manufacturer #: 186205GS
$86.62
  Special Order
Capacitor – Part Number: 312699GS
Capacitor
PartSelect #: PS8945179
Manufacturer #: 312699GS
$125.23
  In Stock
Order within the next 4 hrs and your part ships today!
Switch, Set Exercise – Part Number: 87799GS
Switch, Set Exercise
PartSelect #: PS9160620
Manufacturer #: 87799GS
$5.71
  In Stock
Order within the next 4 hrs and your part ships today!
Gasket – Part Number: 806425
Gasket
PartSelect #: PS9307302
Manufacturer #: 806425
$5.83
  In Stock
Order within the next 4 hrs and your part ships today!
Screw, M5 - .8 X 10 Taptite – Part Number: 74908GS
Screw, M5 - .8 X 10 Taptite
PartSelect #: PS9116859
Manufacturer #: 74908GS
$3.99
  In Stock
Order within the next 4 hrs and your part ships today!
Seal, Foam Alternator Air Inlet – Part Number: 191994GS
Seal, Foam Alternator Air Inlet
PartSelect #: PS8907163
Manufacturer #: 191994GS
  No Longer Available
Control Board – Part Number: 191652GS
Control Board
PartSelect #: PS8904244
Manufacturer #: 191652GS
$346.23
  Special Order
Rectifier, Battery Charge – Part Number: 65795GS
Rectifier, Battery Charge
PartSelect #: PS9054741
Manufacturer #: 65795GS
  No Longer Available
Gasket, Manifold, Muffler – Part Number: 186062GS
Gasket, Manifold, Muffler
PartSelect #: PS9268616
Manufacturer #: 186062GS
$5.99
  In Stock
Order within the next 4 hrs and your part ships today!

Questions And Answers for 01815

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Aaron
January 24, 2020
Runs for about 3 minutes consistently and shuts itself off
For model number 01815
PartSelect logo
Hi Aaron. This is most likely caused by a bad/clogged carburetor. Thank you for your question and good luck with your repair.

Was this helpful?
Thank you for voting!
  • 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wouldn’t start.
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
Parts Used:
Solenoid-Starter
  • Bruce from CARNATION, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
11 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No voltage on secondary side of transformer. Confirmed with meter that transformer windings had infinite resistance.
1. Turn the generator selector switch to "OFF"
2. Remove the 240 volt fuses in the automatic transfer switch to remove power to the transformer.
3. Remove the outside cover from the front of the generator, on the motor end.
4. Remove the 3 screws from the panel covering the controls.
5. Label or make note of which terminals the 4 wires on the transformer go to and disconnect from transformer.
6. Using 9/32 nutdriver, remove the two transformer mounting nuts and lock washers.
7. Remove old transformer from studs and install new one. Reinstall nuts and lock washers.
8. Reconnect the 4 transformer wires.
9. Reinstall the control panel cover and the generator housing end cover.
10. Reinstall the fuses in the automatic transfer switch.
11. Put the generator selector switch back in "Automatic"
Parts Used:
Transformer
  • Laron from GRAND RAPIDS, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!