KitchenAid Mixer Parts

Popular KitchenAid Mixer Parts

Your Price
$7.87
   In Stock
KitchenAid Mixer Retaining Ring
★★★★★
★★★★★
3 Reviews
PartSelect Number PS11746909
Manufacturer Part Number WP9703438
This part is a retaining ring, sometimes called a retaining clip, that holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than an inch in diameter. The retaining ring is a genuine OEM part sourced directly from the manufacturer. The ring may vary in appearance due to manufacturer substitution, but the function is the same. You may need to replace this part if the dryer is noisy during tumbling, will not tumble, or takes too long to dry. Be sure to check drum support roller kit and shaft before ordering parts.
Fixes these symptoms
Installation Instructions
gerald from park city, MT
dryer squeeking
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. Read more...
Your Price
$18.28
   In Stock
KitchenAid Mixer Worm Following Gear
★★★★★
★★★★★
53 Reviews
PartSelect Number PS12070620
Manufacturer Part Number W11086780
This gear is used to power your stand mixer. It is attached to the planetary shaft. The gear can become stripped over time or accumulate grease. You may need to replace other mechanical parts at the same time such as the worm gear and pinions. Make sure the mixer is unplugged before beginning this repair. Clear excess grease as you encounter it during this repair.
Fixes these symptoms
Installation Instructions
Barry from Rowland Heights, CA
wouldnt turn beaters
removed metal strap around motor housing then remove the 4 screws holding top motor cover on, then removed the 4 screws that hold gear cover in place, remove long gear that is driven by the motor gear, then with ring pliers remove ring off long drive shaft and lift off worm gears. once all gears are removed --removed all the old grease ( do this to get all the metal shavings out from the failed gear) repace the grease in the gear housing and reassemble in reverse order Read more...
Your Price
$20.97
   In Stock
KitchenAid Mixer Worm Gear
★★★★★
★★★★★
35 Reviews
PartSelect Number PS11748374
Manufacturer Part Number WPW10112253
This worm gear is an inch and a half in diameter. It is used for some of Whirlpool's brands of mixers.
Fixes these symptoms
Installation Instructions
Raymond from Shirley, MA
motor would run but mixer wouldn't operate: broken worm gear
My girlfriends' stand mixer failed when the accessory drive cap fell into the mixing bowl and jambed the beater, spliting the worm gear. The teeth on this gear are made of nylon and are molded to an aluminum center. This part is designed to fail in situations like this, saving the more expensive transmission parts. Following a repair manual I found online, I first removed the rear cover and pulled out the cord strain relief out from the base. Next I removed the drip cup from around the base of the planetary drive. I then used a pin punch to drive out the pin holding the planetary to the center shaft and removed the planetary. The unit was then inverted and I removed 4 screws holding the bottom cover to the gear case, and the 5 screws from around the planetary drive. The bottom cover was then lifted off. Three screws holding the worm gear bracket in place were then removed and the worm gear assembly lifted out. A small pin holds the worm gear to the shaft. I drove this out with a small pin punch and the shaft and worm gear were then removed. There is also a thrust washer on this shaft, and it's location is important. Make a note for re-assembly. The new gear was installed and the entire process reversed for re-assembly. A successful repair completed! My girlfriend would have replaced this $200 appliance, but I was able to repair it for less than $30 including shipping. Read more...
Your Price
$13.51
   In Stock
KitchenAid Mixer Motor Brush
★★★★★
★★★★★
19 Reviews
PartSelect Number PS11753983
Manufacturer Part Number WPW10380496
Used on Stand Mixers. Sold Individually.
Fixes these symptoms
Installation Instructions
Robert from Minden, NV
Mixer was making clunking sounds and shaking
I removed screws in a sequence that I felt wouldn't further damage the mixer until I had it completely unassembled. When I found the broken worm gear, I went online to find a part. I found an exploded view, but the part numbering was old, and the salesperson couldn't tell me what the worm gear and bracket assembly consisted of, as I only wanted the worm gear. After trying to drive the pin out of the assembly, and failing, I decided to back online and see if anyone else had a photo of the assembly. Luckily (and wisely) PartSelect,com did and that answered any questions I had. The price was better, too. Reassembly of the mixer was a cinch with the exploded view. It's working like new, and we're hoping for another 35 years of service from it! Thanks. Read more...
Your Price
$36.52
   In Stock
KitchenAid Mixer Worm Gear and Bracket
★★★★★
★★★★★
19 Reviews
PartSelect Number PS11740516
Manufacturer Part Number WP240309-2
Used for Kitchenaid Mixers.
Fixes these symptoms
Installation Instructions
Robert from Minden, NV
Mixer was making clunking sounds and shaking
I removed screws in a sequence that I felt wouldn't further damage the mixer until I had it completely unassembled. When I found the broken worm gear, I went online to find a part. I found an exploded view, but the part numbering was old, and the salesperson couldn't tell me what the worm gear and bracket assembly consisted of, as I only wanted the worm gear. After trying to drive the pin out of the assembly, and failing, I decided to back online and see if anyone else had a photo of the assembly. Luckily (and wisely) PartSelect,com did and that answered any questions I had. The price was better, too. Reassembly of the mixer was a cinch with the exploded view. It's working like new, and we're hoping for another 35 years of service from it! Thanks. Read more...
Your Price
$22.07
   In Stock
KitchenAid Mixer Hub Gear
★★★★★
★★★★★
28 Reviews
PartSelect Number PS12348886
Manufacturer Part Number W11192795
Includes both the attachment and beveled gear. This worm follower gear is for stand mixers. Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached. Unplug the mixer before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
Installation Instructions
WES from BREVARD, NC
Plastic gear housing in stand mixer fractured causing gears to crash
Removed four screws to remove main cover. Removed four more screws to remove fractured plastic gear housing cover. Removed retainer ring and slid two gears and dowel off main shaft. Lifted out remaining gear train and bearings, Removed all grease and metal chips from all components. Greased new gears and reassembled. Replaced plastic gear housing cover with oreviously purchased die cast replacement part. Assembled main cover. Read more...
Your Price
$48.07
   In Stock
KitchenAid Mixer Worm Gear
★★★★★
★★★★★
3 Reviews
PartSelect Number PS11747012
Manufacturer Part Number WP9709231
Sold individually.
Fixes these symptoms
Installation Instructions
Dennis from Lake Mills, WI
Mixer Made Very Bad Grinding Noise, And Would Skip While Making Bread Dough
1, Removed trim piece (1 screw) 2, removed cover (4 screws) 3, removed speed switch assembly (2 screws) 4, removed gear cover (4 screws) 5, removed and examined 2 worm gears for wear. Gear cover was badly cracked, don"t know if it was caused by a previous repair or by heat, as old cover is plastic. Received new parts and installed them, 2 bearings, 2 worm gears, 1 new cover of diecast metal and a new gasket. All repairs made with a #2 phillips screw driver. My wife then made bread, and it preformed flawlessly. Read more...
Your Price
$73.23
   In Stock
KitchenAid Mixer Stand Speed Control Board and Knob (Black)
★★★★★
★★★★★
25 Reviews
PartSelect Number PS11746947
Manufacturer Part Number WP9706648
This assembly includes the black knob. Used with Stand Mixers.
Fixes these symptoms
Installation Instructions
James from Villa Rica, GA
Mixer speed was uncontrollable
Removed screw from back of mixer cover band and then removed the 4 side screws, lifted top off of mixer and removed screws from circuit board control switch, removing wires one at a time so as to install correctly. replaced screws in circuit board/control. Restored top of mixer replaced screws and the put cover band back on mixer.walla done Read more...
Your Price
$8.90
   In Stock
KitchenAid Mixer PIN-GROOVE
PartSelect Number PS11750745
Manufacturer Part Number WPW10234531
Installation Instructions
Iftikhar from PACIFICA, CA
dough mixer paddle not turning.
Connecting pin broken replaced. Tested unit works fine. Read more...
Your Price
$26.95
   In Stock
KitchenAid Mixer Flat Beater
★★★★★
★★★★★
33 Reviews
PartSelect Number PS11757063
Manufacturer Part Number WPW10672617
This Flat Beater Part Number WPW10672617 is for Stand Mixers. Attaches to the beater shaft and is for normal to heavy mixtures such as cake batters or cookie dough. This has a powder coated finish.
Fixes these symptoms
Installation Instructions
MARILYN from St. JOseph, IL
Flat Beater Powdercoat covering was peeling off.
I just traded the old beater for the new. It was just in time for cookie making. Read more...

KitchenAid Mixer Appliance Types

Related KitchenAid Mixer Parts

Popular KitchenAid Mixer Models

Below are the most popular KitchenAid Mixer models we have. Enter your model number in the search box to find your model.