General Electric Range Caps and Lids
Popular General Electric Range Caps and Lids
General Electric Range COVER LED Assembly
PartSelect Number PS4704284
Manufacturer Part Number WR55X11132
COVER LED Assembly FF
Fixes these symptoms
- Light not working
- See more...
Installation Instructions
DON from SAN ANTONIO, TX
LAMP WAS BURNED OUT
EXCHANGED THE LED LAMP ASSEMBLY. ONLY DO ONE AT A TIME AS THEY ARE WIRED IN SERIES!
Read more...
General Electric Range Stirrer Fan Cover
PartSelect Number PS1480811
Manufacturer Part Number WB06X10712
The stirrer fan cover in your microwave can be found on the roof of the microwave. It protects the fan from damage and debris. This fan cover is made of white plastic and is approximately 7.5 inches in diameter. Occasionally, the stirrer fan cover can melt, and become damaged. If you smell burning from your microwave or notice damage, the fan cover should be replaced. The stirrer fan cover is sold individually, and is an OEM part directly from the manufacturer.
Installation Instructions
Steven from UTICA, NY
cover stirrer fan was burned and sparking in three part even the plastic rivet
just in 1 2 3 step easy way. First unplug the power cord,use a small flat-head screwdriver to pull out the plastic rivet pin,rotate the old cover counter clockwise to removed lift out the blade assembly, install the new cover stirrer fan by first positioning the blade assembly then align the cover and rotate it clockwise to secure, then replace the mounting plastic rivet pin;with the repair completed, plug the power cord back in and your microwave oven should be ready for use again. : )
Read more...
General Electric Range CANOPY MICA
PartSelect Number PS1017735
Manufacturer Part Number WB06X10638
Installation Instructions
Bill from MAGNOLIA, TX
The part was burnt and was causing sparking inside the microwave
Removed the old canopy mica, it has tabs that slip into slots on the top of the microwave. Then installed the new part, the tabs are inserted into the same slots.
Read more...
General Electric Range Outer Burner Cap
PartSelect Number PS3503823
Manufacturer Part Number WB29K10044
General Electric Range WAVE GUIDE COVER WITH NU
PartSelect Number PS9493024
Manufacturer Part Number WB34X21610
General Electric Range Light Cover Frame
PartSelect Number PS651487
Manufacturer Part Number WB36X10216
Glass not included.
Installation Instructions
jerene from Houston, TX
Glass was broken
I took the cover off, and replaced the glass-- the difficult part, was ordering the glass..on the list of parts to order-- the description of the glass was mis-leading
Read more...
General Electric Range Right Hand End Cap - Black
PartSelect Number PS228334
Manufacturer Part Number WB07K10003
This right hand end cap is located on the end of the control panel.
General Electric Range End Cap - Left Side
PartSelect Number PS228337
Manufacturer Part Number WB07K10007
Mounting screws are not included.
Installation Instructions
James from Federal Way, WA
end caps on range were cracked
I was surprised to find that the 2 screws holding on the plastic end caps were not philips. it looked like an allen wrench deal but that didn't work. Turned out that I had to buy a hex tool. Looked kinda like a swiss army knife but had allen wrench like hex tools in various sizes. By then I was determined to finish the job even if it meant buying a tool I'd never use again. The job took about five minutes once I had the right tool. The stove looks normal now. The stove looks brand new but for some reason there were cracks in the end caps where the screw hole were.
Read more...
General Electric Range End Cap - Right Side
PartSelect Number PS228336
Manufacturer Part Number WB07K10005
Installation Instructions
James from Federal Way, WA
end caps on range were cracked
I was surprised to find that the 2 screws holding on the plastic end caps were not philips. it looked like an allen wrench deal but that didn't work. Turned out that I had to buy a hex tool. Looked kinda like a swiss army knife but had allen wrench like hex tools in various sizes. By then I was determined to finish the job even if it meant buying a tool I'd never use again. The job took about five minutes once I had the right tool. The stove looks normal now. The stove looks brand new but for some reason there were cracks in the end caps where the screw hole were.
Read more...
General Electric Range CARTON COVER THERMOSTAT
PartSelect Number PS951768
Manufacturer Part Number WB02K10070
Related General Electric Range Parts
- All General Electric Range parts
- General Electric Range Brackets and Flanges
- General Electric Range Circuit Boards and Touch Pads
- General Electric Range Cooktops
- General Electric Range Doors
- General Electric Range Drawers and Glides
- General Electric Range Drip Bowls
- General Electric Range Elements and Burners
- General Electric Range Filters
- General Electric Range Fuses
- General Electric Range Glass Tray and Supports
- General Electric Range Grates
- General Electric Range Handles
- General Electric Range Hardware
- General Electric Range Hinges
- General Electric Range Igniters
- General Electric Range Ignitions
- General Electric Range Insulations
- General Electric Range Knobs
- General Electric Range Latches
- General Electric Range Legs and Feet
- General Electric Range Lights and Bulbs
- General Electric Range Motors
- General Electric Range Panels
- General Electric Range Racks
- General Electric Range Seals and Gaskets
- General Electric Range Sensors
- General Electric Range Springs and Shock Absorbers
- General Electric Range Switches
- General Electric Range Thermostats
- General Electric Range Trims
- General Electric Range Valves
- General Electric Range Wire Plugs and Connectors