Popular Cooktop Valves

Your Price
$32.00
  In Stock
Cooktop Burner Cap - 15K
★★★★★
★★★★★
21 Reviews
PartSelect Number PS954107
Manufacturer Part Number WB28K10222
This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in color and is sold individually. It is a little more than 4 inches in diameter. To replace the burner cap, simply remove the damaged cap, and replace it with the new one. No tools are required for this repair. This is an OEM part from the manufacturer.
Installation Instructions
Alejandro from Newark, NJ
The Burners and Burner Caps were missing
Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple. Read more...
Your Price
$30.17
  In Stock
Cooktop Burner Cap - Black - Medium - 9500 BTU
★★★★★
★★★★★
16 Reviews
PartSelect Number PS954202
Manufacturer Part Number WB29K10023
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part that will replace it. This is an OEM part sourced directly from the manufacturer and is sold individually.
Installation Instructions
John from Simi Valley, CA
Missing burner head and all 4 caps on cook top.
All I needed to do was replace the missing burner head and caps. Cook top is now back in service. Thanks for getting me the parts in a very timely manor! Read more...
Your Price
$48.64
  In Stock
Cooktop LP Conversion Kit
★★★★★
★★★★★
7 Reviews
PartSelect Number PS3633782
Manufacturer Part Number GRLP4
The LP conversion kit is used in ranges
Installation Instructions
James from KENSINGTON, OH
BAD LIGHT SOCKET
Repaired under warranty Read more...
Your Price
$19.93
  In Stock
Cooktop Burner Cap
★★★★★
★★★★★
22 Reviews
PartSelect Number PS954203
Manufacturer Part Number WB29K10024
This is a burner cap for your gas range. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. The cap is black in color and about 3 and a half inches in diameter. This is a quality OEM part sourced directly from the manufacturer. This cap is sold individually.
Installation Instructions
John from Simi Valley, CA
Missing burner head and all 4 caps on cook top.
All I needed to do was replace the missing burner head and caps. Cook top is now back in service. Thanks for getting me the parts in a very timely manor! Read more...
Your Price
$39.01
  In Stock
Cooktop Burner Head - Large - 12K
★★★★★
★★★★★
14 Reviews
PartSelect Number PS1480992
Manufacturer Part Number WB16T10046
This part is the replacement surface burner head for your gas range. It is silver in color and is approximately 3.5 inches in diameter. This burner is sold individually. The burner head distributes gas to create an even flame across the cooking area. If you notice that your food is not cooking evenly, or you are not getting an evenly distributed flame, you may need to replace the burner. The burner is located beneath the burner cap, below the grate. To remove the burner, simply remove the grate and the burner cap, then lift the burner head out. Replace it with the new burner and reinstall the cap and grate. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...
Installation Instructions
Alejandro from Newark, NJ
The Burners and Burner Caps were missing
Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple. Read more...
Your Price
$18.92
  In Stock
Cooktop Burner Cap - 5000 BTU - Black
PartSelect Number PS954201
Manufacturer Part Number WB29K10022
This is a burner cap for your gas range. The cap is black in color and about 3 inches in diameter. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. This is a quality OEM part sourced directly from the manufacturer. This cap is sold individually.
Installation Instructions
John from Simi Valley, CA
Missing burner head and all 4 caps on cook top.
All I needed to do was replace the missing burner head and caps. Cook top is now back in service. Thanks for getting me the parts in a very timely manor! Read more...
Your Price
$39.74
  In Stock
Cooktop Burner Head - Medium - 9500
★★★★★
★★★★★
9 Reviews
PartSelect Number PS1020327
Manufacturer Part Number WB16K10055
This burner head, or surface burner, is used in ranges and ovens. The burner sends gas through the holes and slots to create an equal flame across the cooking area. If the gas igniter glows but will not light up, or there are heating inconsistencies, replacing the burner head could be the solution to your problem. No tools are required for this installation. To change the burner, first lift the grate and take the burner cap off. Next, lift the burner away from the cooktop. To set the new burner in place correctly, check the locating tab that fits into the V-shaped notch and make sure the igniter fits into the cut-out. Refer to the diagram provided by the manufacturer for further instructions.
Fixes these symptoms
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...
Installation Instructions
Alejandro from Newark, NJ
The Burners and Burner Caps were missing
Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple. Read more...
Your Price
$81.02
  In Stock
Cooktop X-Large Burner Head with Electrode
★★★★★
★★★★★
11 Reviews
PartSelect Number PS2085280
Manufacturer Part Number 74007736
This is the burner head and electrode for your gas range. If your gas igniter glows but will not light, or if the element will not start or heat entirely, you may need to replace the burner head. This burner head is approximately 4¼ inches in diameter and is sold individually. Please note that the mounting screws for this burner head are sold separately. To replace the burner head, simply unscrew the old, defective burner head and screw in the new one.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...
Installation Instructions
Joe from Saratoga Springs, NY
electrode would not lite burner
Unscrewed burner head and replaced with new burnerhead and electrode. Just like new. Parts cost 128.00 including shipping. Very simple repair. Saved 200.00 in labor. Parts came within 36 hours. Super Fast. Read more...
Your Price
$39.76
  In Stock
Cooktop Small Burner - 5K
★★★★★
★★★★★
8 Reviews
PartSelect Number PS3486550
Manufacturer Part Number WB16K10070
Sold individually.
Fixes these symptoms
Installation Instructions
Alejandro from Newark, NJ
The Burners and Burner Caps were missing
Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple. Read more...
Your Price
$61.85
  In Stock
Cooktop Vision Burner - Extra Large
★★★★★
★★★★★
5 Reviews
PartSelect Number PS1480987
Manufacturer Part Number WB16K10062
This is a replacement vision burner or surface burner head for your gas range. It is silver in color and approximately 4.5 inches in diameter. This burner is sold individually. The burner head distributes gas to create an even flame across the cooking area. If you notice that your food is not cooking evenly, or you are not getting an evenly distributed flame, you may need to replace the burner. The burner is located beneath the burner cap, below the grate. To remove the burner, simply remove the grate and the burner cap, then lift the burner head out. Replace it with the new burner, and reinstall the cap and grate. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
Installation Instructions
Alejandro from Newark, NJ
The Burners and Burner Caps were missing
Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple. Read more...

Cooktop Valve Brands