Bolens Snow Blower Parts

Popular Bolens Snow Blower Parts

Your Price
$11.36
   In Stock
Bolens Snow Blower Clip-Hold Down (Nylon)
★★★★★
★★★★★
1 Review
PartSelect Number PS9903766
Manufacturer Part Number 1724869099
Hold-down clips, also known as retaining, locking or fastening clips, are designed to secure and fasten specific parts within equipment, and the use depends on the type and model. This hold down clip is used to secure the chute of various models of snowblowers, and is sold as an individual OEM part, without any securing hardware. Made of nylon, this clip secures to the chute with two screws and two washers. If you notice a wobbly or insecure chute resulting in excessive vibrations from the chute, check to make sure the clip is in-place before inspecting it for damage and ordering a replacement. To replace this clip, you will need to gain access to the chute, with either a screwdriver or wrench, and once you can access it, it is as simple as unscrewing the old clip and installing the new clip and rest of the assembly.
Your Price
$3.99
   In Stock
Bolens Snow Blower Shear Pin, .25
PartSelect Number PS9110822
Manufacturer Part Number 738-04124A
This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the auger and auger shaft, which are the rotating blades, and to protect more valuable components such as the transmission.If the snow is causing excessive force or there is a jam within the auger and connected housing,it will cause the shear pin to snap, effectively stopping the rotation of the auger, while the auger shaft and gears will continue turning. If the shear pin snaps, snow will simply build up on the outside of the auger housing, since the auger will no longer spin. This shear pin has a .25-inch diameter, and 1.5-inch length and is sold individually. Most augers have a pin on each side, so you may need to purchase more than one, and it is also recommended that you carry spare pins in case of a future breakage.
Your Price
$2.99
   Special Order
Bolens Snow Blower Cotter Pin
PartSelect Number PS10003638
Manufacturer Part Number 714-04040
Your Price
$3.99
   In Stock
Bolens Snow Blower Carburetor Gasket Plate
PartSelect Number PS17016727
Manufacturer Part Number 751P11897B
Carburetor Gasket Plate
Your Price
$4.49
   In Stock
Bolens Snow Blower Chute Flange Keeper
★★★★★
★★★★★
1 Review
PartSelect Number PS10005747
Manufacturer Part Number 731-0851A
This chute flange keeper is sourced from the original equipment manufacturer for use in snowblowers. The plastic keeper allows the snowblower chute to pivot, and secures the flange that connects the chute to the blower frame and holds it in place during use. Over time the flange keeper can break or fall off, which causes the chute to dislodge or shift from its position. If you notice that debris is discharged in the wrong direction, and you have difficulties adjusting the chute then this is a sign that the flange keeper is no longer functioning as it should. Clean the chute flange and surrounding area before placing the new keeper on. Use a pair of pliers to align the the holes on the flange keeper with the holes on the chute and lock it in place.
Installation Instructions
Jason from PEABODY, MA
Carburetor rebuild
I can’t complete this easy repair because partselect sent the wrong part and has not responded to customer service requests. Please contact me- jtandree@gmail.com Read more...
Your Price
$4.07
   In Stock
Bolens Snow Blower Carriage Bolt, 5/16-18 x .75
PartSelect Number PS10001568
Manufacturer Part Number 710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.
Your Price
$4.32
   In Stock
Bolens Snow Blower Bell. Wash. .340 I.D. x .872 O.D.
PartSelect Number PS10006541
Manufacturer Part Number 736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damaged, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.
Your Price
$4.19
   In Stock
Bolens Snow Blower Nut, Flange Lock, 1/4-20, Grf
★★★★★
★★★★★
1 Review
PartSelect Number PS9299574
Manufacturer Part Number 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when properly threaded. It is sold individually, not as part of a kit or assembly. It is black, made of metal, and is found in a variety of locations. Refer to your owners manual to determine if this is the correct part. This part will need to be replaced when it is weak or broken. The symptoms experienced when this part breaks will depend on its location. You will need pliers to complete this repair. Customers rate this repair as Easy.
Your Price
$23.74
   In Stock
Bolens Snow Blower Slide Shoe
PartSelect Number PS9135084
Manufacturer Part Number 784-5580-0637
This Slide Shoe is rated as "Easy" to install and requires a wrench set. It is a manufacturer-approved part that comes in black and is constructed of metal. The part is used to help the snowblower slide smoothly and is attached on the side of the augur housing. If missing or broken, it should be replaced.
Your Price
$4.21
   In Stock
Bolens Snow Blower Fuel Drain Plug
PartSelect Number PS9087643
Manufacturer Part Number 710-04938

Bolens Snow Blower Appliance Types

Related Bolens Snow Blower Parts

Popular Bolens Snow Blower Models

Below are the most popular Bolens Snow Blower models we have. Enter your model number in the search box to find your model.